Show off your wheel/tire setup!

yup, they are Enkei wheels. Toyota used to have a contract with them to make a lot of their wheels. not sure who is making them now. anytime you see that figure 8 style in the center cap, that's an Enkei wheel.

 

What is that offset?

 

4mm.

 

4mm offset, 7" wide rim. same for all T4R Pro 17" wheels unless they are FN knockoffs.

 

Are you tucked on the fenders with that? I’m looking to go around zero offset with 8.5-9 inch wheel. Calculating out that should be around 1.2ish inch difference from you set up with a 9 inch at 0 offset. I want to have my tread right at the stock flare limit which is why I ask. I’m eyeing up the icon Alloy series or something similar.

 

I can take a pic for you tomorrow. I am also planning on switching to Icon Alloy Compression wheels in bronze.

 

That would be great! I’m sitting here trying to calculate all this stuff. It’s a pain and would be nice to see some. I think if I go 9 inch with a zero offset I’ll be 2 inches wider than stock OR models. 8.5 would make me 1.75 wider than stock. Looking to stay 2650/70 but go to 17 instead of 16

 

2019 trd off road with my new pro wheels and bumper ends

 

Running 265/70/17s on SEMA Wheels + 2-inch lift. I think 275s are in my future.

 

here ya go. 265/70/17 G2s on 7" wide rims and 4mm offset...we put a windshield strip on a Tacoma today and he had 9" wide rims and -12mm offset on the same size tire and his stuck out about an inch. plus his tires looked huge compared to mine because his wheels were 2" wider. his truck looked lifted, but it was not.

 

Thanks! That front is close and back has a little room to spare. The 8.5 wheel at 0 offset puts me just under an inch wider than yours is. He’d be about an 1.5 inches wider than yours. Seems like I’ll be really close to perfect with 8.5 at 0 offset.

 

the wheels I am looking at now are 8.5" wide with 0 offset as well.

 

I’m guessing 1/4 inch poke from the flares. Now I need to figure out if that’s just sidewall (legal for my state) or tread exposed (fails inspection)

 

i have the FN Konig Six Shooters, they have those specs with 4.5" backspacing. i think they are perfect.

 

That backspace should be a -6 offset. If that’s the case a 0 offset should keep the tread under the flare like I need! Thanks!

 

SCS Sr8 brushed copper and cooper at3 xlt 285/70r17

 

So much Yes!!! Been debating this size. Looks awesome