TTC ☆ OFFICIAL

Okay

 

Oddly, I want me seats tilted back more. I wonder if the spacers would work in the front? I am so strange.............

 

You can get away with about 5/8 stack of washers in the front. If you go more than that you will have to cut off the locator/anchor pin on the rail just behind the front bolt.

 

prob not, the front is at a slanted angle that if lifted would cause the seat brackets to go forward and up subsequently causing misalignment issues with the rear mounts.

 

Going to try the spacers but also going to look more into the T4R seats or something

 

Thanks, I will look at it and see if it will work.

Thanks, I will look at it and see what the heck you are talking about! I am confused.

Thanks, yes this is exactly how I like to Pimp my Whips!!!!!!!

 

OHHHHHH, that's a good idea!!!!! My 4RT was super comfy!!!

 

That's why I got me an AC, so I can sit in the back "n Recline, lol

 

Fixing to call my buddy to start looking for seats or get on the hot list

 

Yea, when I check for traffic on my quarter it's out the back window. I have a 28" inseam and am only 5' 8.5" tall but most guys 6' tall or taller have to move the seat forward to drive my vehicles.

 

Well, at least You got heated. Just ordered my Covers & Heaters today.

 

Some place I saw a list of Lexus seats that would bolt in the 3rd gen Tacoma’s. Can’t find it now.

 

On fender chop number 4. Yayyyyyyy

 

I need to do some more checking to see just what will bolt in, but Lexus sound nice.

 

I saw another write up where somebody adapted the electric seats from a 4Runner limited to a taco. I don’t think the driver 1/2 modul was used though.