What Have You Done To Your 3rd Gen Today?

Awesome..thx!

 

@tonered had us all beat. I actually make his design, because they are too costly to 3D print with the necessary 100% infill. The file is in this thread for anybody to use.

 

They run down the side of the of the windshield underneath weather stripping. There is a channel that works perfect there. Then they go under hood to battery for power and wire harness for the switch goes through the fire wall of the vehicle. If you need/want pics let me know.

 

Not going to do anything to it today except spend time with it on our 1 year anniversary together..

 

I got my lift kit installed 5100s all around, OME 888s, AAL, and some brand new Wildpeaks 265/75/16. P.S. is it normal to get these heights afterwards? I got 39in in the rear and 38in in the front. The measurement was from the ground to the bottom of the fender flare (the black plastic not 100% sure). I do have an SOS bumper so that might be why its not right at the "38.5" that Ive heard before. Pics later when I get a chance to take some.

 

Heres a pic of it while it was at the shop.

 

nice!! now take some warm water and wipe off the blue coating off that lettering lol

 

Thanks!

 

Im not beholden to any particular brand, and damn those are sick looking tires. My wife actually drives the big tire purchases, will show these to her. It will be a done deal. If they dont wander or flex on turns, Im in.

 

Thanks! We come to this thread for Tacoma mods.

 

And help us spend all of our money!

 

Today I rigged up some brackets to mount my shovel and traction boards to my KB Voodoo bed rack
Waiting till ups shows up today because they have the boards.
I have all the hardware just need to know the mounting dimensions.


I also upgraded my nav tab. Samsung A8 is fantastic 8in display and using the ram A8 specific tab mount with the DMM it's perfect.

[/QUOTE]

 

Oh and I got tracking info on my sliders. 7 days from order to ship.

 

Did u get uca’s for your 888’s?

 

Im running the same setup on stock arms and my alignment specs are all green.

 

Where did you get those raptor lights for the grill? I like how small and simple they are. Do you have a link?

 

Loving this add! Thanks for posting.

 

Thanks! How much lift up front did you get with 888’s. I’m going back and forth on 888’s or 887’s. I have 265/75/16’s with sliders being the only additional weight.

 

My neighbor Tom McFIXit
Installing the gift he bought me for Christmas. My neighbors are the best. My truck sat in their garage overnight so the plastic could warm up enough not to snap

https://youtu.be/MJIyop-qexQ
Bed lights hooked up to the cargo light switch . Toyota finally has a cargo light and I put a tonneau cover on!


Xpriteusa.com


Ran it through the cubby holes and hooked up to the cargo light switch to the left of the steering wheel.A little overkill riveting them in but these puppies aren’t coming out. Tucked the wires behind the railing by loosening the screws. Lined up lights with the screws holding the rail in place!

Came out awesome! 4 leds per pod . 4 pods per string.super bright.
Bed lit up with tonneau!

Having wiring problems.. this guy shows the wire to connect to your cargo light switch
https://youtu.be/ofB834nEVkw

And....
Out with old grill








If you live in south east Wisconsin and need something fixed, my guy
Tom (my neighbor) MCFIXIt can install, add, replace or rebuild anything at reasonable rates. He was a Toyota mechanic and now can fix anything from a skid loader to a dump truck.