How much lift for 33s without cutting or trimming?

I have a 09 Tacoma TRD sport and want 33s or slightly smaller, I don’t know how big of a lift to get without trimming. Thanks

 

If you go, 255 no trimming at all. That's what I'm running

 

To properly fit *most* any tire other than stock, you will need to trim/cut. The reason being is lift doesn't help you clear larger tires other than at ride height on a smooth surface. As soon as you hit bumps, take turns or both, you're going to rub and the way to remedy that is to cut shit out of the way.

 

2010 dclb sport 4x4 here...
2” OME lift and 265/75/16 (32”) and I have minimal rub at full lock.

 

I have a DCLB with Falken wildpeak 285/75/17 (33's)

Have OME 886 up front on nitrocharger 90002's, giving me 3 inches up front and I have 2.5 inch blocks in the rear. No rubbing whatsoever

 

Yoga time

 

A full OME lift and 275/70r17 should clear no problem without cutting or trimming

 

Yoga and a little bit of prayer haha.

 

I’m Almost positive that 265’s are 31”

 

31.5" if you wanna split hairs. And if you wanna go deeper each manufacturer has a slightly different diameter.

 

That’s true I know bfgoodrich run a little small.

 

Yeah their 34x10.5" tire is really only like 33.2" in diameter or something stupid like that when people took a tape measure to them.

 

if you never go off road you might get lucky and never rub except maybe a little plastic rubrub at full lock. rim dimensions play a big role in that too

 

anything larger than a 265/75R16 and you will need to cut if you actually go places other than the mall. You might get lucky if you have a good alignment guy with 255/85R16's and not have to do a cab mount chop. 285/75R16's plan on cab mount chop, inner fender removal / massive trimming, and possible pinch weld flattening.

Those that say they fet a 285/75R16 without the above never go more than straight over a speed bump.

 

I’m running their KO2’s thus my “positive ness” lol

 

Yes 265/75 is a “32” although specs say “31.8”.

I believe the factory 265/70 is a “31”

 

Guys.... stop the guessing.

https://www.tacomaworld.com/tirecalc?tires=265-75r16-265-70r16

265/75R16 = 31.65in

265/70R16 = 30.61in

https://www.tacomaworld.com/tirecalc?tires=285-75r16-255-85r16

285/75R16 = 32.83in

255/85R16 = 33.07in

Now there are some slight variances between manufactures, but they will list that on their websites.... +- .2in or so in diameter.

 

Who doesn’t wanna go deeper??

 

theres quite a few tires that are 32 on the dot in a 265/75/16, some coopers are even over 32