What Have You Done To Your 3rd Gen Today?

Finally got my “Toyota OEM” (not really but almost OEM) fog lights installed today in my SR.



But I do need to change out the switch to make it look more stock.

 

It came with the light for the bed. Is that the cargo light?
But it did not come with a harness for the fogs.

 

Lately it has been called a "pen holder" but way earlier is was the key holder for the tailgate.

 

I gotta believe that the clear lens would be the same size. No?

 

Yup; I assume so. Came on the truck when I got it. I never removed it so don’t really know for sure. Btw I was up in Portsmouth last weekend. Chilly!

 

Got the ARB rear bumper finally installed! Love the black against the body color BEEFY AF!

 

ARB Front Recovery Point installed as well..also beefy as all hell, as expected it’s gotta weigh 20 pounds..

 

Prinsu CabRack install complete

 

Did you get them on eBay?

 

It wasn't terribly difficult to remove the old socket. Inside of the metal cylinder, there are two holes with tabs; I used a couple of picks to press in the tabs and pull out the cylinder. Once the metal cylinder is out, the plastic surround pops right out as well. Then unplug the wires.

Installing the new charger is a bit more difficult. The replacement USB charger is slightly larger than the hole left behind, so you'll have to Dremel/file just a bit to get it to fit in. Then you'll have to remove the upper trim surround around the stereo and remove the stereo to get at the back of the USB charger to put the locking ring on and wire it up.

 

Spring is close! Just washed the first Dusting of Pollen off her, and installed two Jam Handels. Wasn’t sure about picking these up, but I like’em.

 

There’s a chip at it’s base about the size of a gnat, which I didn’t know was there. Throw in a couple of days where the temp went from 27 with windchill at night to 79 during the day and viola, you get into you truck after 5 days 7 days of it being parked to find your new crack.

 

Added 3rd rail for my bicycle mount to attach to and some Tacoma tailgate letters.

 

Thanks for the info.

 

Actually, it was yesterday lol

 

Well just got the ARB rear locker today, can’t believe it came from Slovakia, I’m surprised is showed up, paid $385 shipped.

Whichever the case, I’m installing the compressor and paying to have the locker installed.

 

How'd you make the shelf work? It looks like the side notches are still there, but the notches on the bottom of the glove box are gone now.

 

Did you get the OEM 27F battery tray also? Anything needed to get the terminals to fit/reach?

 

My ‘19 Didn’t come with it and I missed having this option so I purchased a used one eBay and Cut the two lower retaining clips off with a dremel and replaced them with two small round Velcro pieces. The slots for clips are no longer on the bottom of the glove box like my ‘17 had. This glove box shelf accessory is 80.00 from Toyota new. Online dealerships get 60.00 for them new. I paid 20.00 shipped. Not sure why they discontinued it. Thanks.

 

Installed the $20 (more or less) power tailgate lock. Works as advertised so far.