What Have You Done To Your 3rd Gen Today?

Installed Klearz center brake light lens & Amazenar 194 LED bulbs:
https://klearz.com/products/toyota/tacoma/05-15_tacoma_3rd_brake_light

Alopee 4PCS 194 LED Bulb Red,T10 LED Bulb,168 LED Bulb, 2825 LED Bulb W5W 158 501 Error Free LED Light for Car Dome Light Tail Light DC 12V

https://www.amazon.com/gp/product/B01M04LYAZ/

One bulb first installed to verify polarity. Remaining two bulbs, clear lens, and gasket then installed.

 

Thanks

 

Thanks. What size KO2's do you have in mind? I put the same wheels on in December and I'm also running the stock tires but I'm looking to upgrade. I'm trying to figure out how much tire I can get on the 4Runner Pro wheels and seeing what others are putting on them.

 

The Hella horns physically bolt on at the stock location. The stock connector fits on the Hella blade terminal as well. However, whereas the stock Denso horn is grounded through its mount, the Hella horn needs a separate ground wire. It's simple enough to fabricate with a blade receptacle on one end and a ring terminal on the other end (2nd gen shown):



The two stock Densos draw 9A total while the Hellas draw 11A. I replaced the factory 10A fuses with 15A fuses. The "proper" way would be to install the included Hella relay, but I didn't want the complexity of running two relays in series (since the stock horn relay would still be in the system).

 

Dang that’s a good looking truck! What wheels are those? Bronze looks great!

 

Doesnt really interest me that much tbh. I dont wanna look like I can drive over anything, I wanna be able to.

 

With the size of my extinguisher, the seat slides far enough to fit all reasonable-height passengers, but not all the way forward. I removed my rear seats last week, so rear legroom is not a concern.

According to Refined Cycle, the seat can slide all the way forward if the extinguisher is small enough.

 

I can post what I want, AMERICA!! LOL...

 

Finally not -40f in Chicago, so I cleaned up my interior and bed finally. Got the MESO interior lights in, quikfist mounts in bed, extra tie down points in bed, and some other little BS things to make my life a little easier. Went a little too happy with the quikfist mounts and mounted my snow remover thing....

 

Thanks

 

I traded a nice Lexus for mine. Best trade I’ve ever made!!

 

Installed amber sidemarker delete, tactilian flag magnets, trd skid plate, tufskinz trd skid plate decal, H16 led fogs, yellow lamin-x for foglamps, California legacy plate, oem roof rack...

 

Did you go with steel or aluminum?

 

I would put where the the Qi Charger was.

 

I had the D-Rings on my ‘14 and ‘17 large rear cubby. My ‘19 off-road Double Cab didn’t come with the large Drivers side cubby.

 

Very nice truck. The amber delete is just a sticker on the headlights over the sidemarket part? Where did you get em and does it look good up close?

 

Thank you. Yes they’re just like a smoked tint sticker and I ordered it from here:
https://importequipment.com/collect...side-marker-light-overlay-fits-2016-2017-2018

 

Installed a pair of Cali Raised Ditch lights on the 2018. Very easy to do only hard part was getting the rubber grommet back in place on the fire wall a little lubrication took care of that (oh here it starts now ya dirty minded bunch of perverts ) got all the wiring in place lights work great now need to night time aim them but holding off because I got the wrong OEM switch.

 

Installed car-solutions anytime camera mod with front camera today... simple and quick, and the best part is no additional buttons or switches to install and/or solving issues trying to match factory blue color or brightness. Camera comes on with a double tap on the steering wheel mode switch, and then use the up/down buttons to select desired camera, works perfect.

https://car-solutions.com/en/rfcc-ttg2-car-camera-control-system-for-toyota-touch-2-entune.php