SCS RAY10 wheels 16x8 & 17x8.5

No need. At least I didn't. No abnormal wear.

 

Not needed at all. Alignment is usually done if there's been a change in the suspension components.

 

Sup Vin!? Long time Bro! Happy New Year. My Copper Ray 10's are still droppin' panties!

 

Looking sharp as always Rob!

 

Thanks!

 

What lift are you running? Inches up front? Rake? Truck looks great!

 

Thanks!

Welcome to the forum!

I wanted more beef, but also wanted to stay under $2k. I went with the Bilstien 5160/6112 shocks and coilovers, paired a @HeadStrong Off-Road 3 Leaf AAL, and JBA Std Duty High Castor UCAs.

@HeadStrong Off-Road is great to work with.

I got nearly 3" in the back and about 2.5" up front. This only adds to the natural rake. Which yes, it how trucks are meant to be. If you use them as a truck, and tow or haul. I do.

I'm adding armor as you saw, and besides the sliders, I have a full aluminum skid assortment sitting in my garage, from @Mobtown Offroad.

So yea, this bitch is definitely going off road very soon. And now that the honeymoon is over on the wheels, so to speak, I'm not so freaked out about that.

All in all the suspension upgrades suits me. It's economical, and still beefier than some. I don't slow down for speed bumps ever. I've been testing it over these rr tracks that are in the middle of this hill, but they are flat. So far, since the legal speed limit is xx I've been able to hit it at 55 mph. Phhht. I need more room to do a proper test.

So yes, I'm extremely happy with this setup. But I'm frugal and demand the most for my money.

 

That’s good to here. I am about to pull the trigger on the same setup. What clip do you have it on? 5/6 To get the 2.5? Also have been working with headstrong and looking at the 3leaf aal. So with your OL in you acquired 3” in the rear? I might take the OL out if that’s the case. I have a dblcab sb manual tranny OR. With sliders being my only xtra weight. I wonder if the lighter tranny up front would push me up higher? Thanks for the info!

 

Yea, I kinda knew I might be adding a RTT so the the extra rear will help with that too!

Measure your center of axle to the bottom of the fender! I didn't. I went with the 6/5 setup to compensate for "the lean". Now I'm getting ready to adjust the passenger side to the 6 setting. I should have measured.

 

Unboxing was a dream! Hats off to SCS for a superior product! Will post post wheel/tire pics here shortly

 

As we head into tax season, I appear to have missed the boat on 16" Ray 10 in Dark Bronze.... anyone know a good way to try to find some?

Thanks!

 

Same, trying to locate bronze or gunmetal.

 

Did you go to the Vendor/Retailer links on the SCS web site? There are certain Toyota Dealers that sell them frequently. For the life of me I can't remember the names of them but someone might chime in.

 

Freeman I know is out of 16's I think Bellevue is the other dealer. I'll have to check the links out. Thanks.

 

Yea, Freeman is the one I couldn't think of.........cool.

 

picked up the new ray10 17x9 -38 offset earlier today.

 

Just called Bellevue Toyota, snagged a set of gunmetal for my Cement, paid a bit more in shipping, but worth it. Thanks!

 

Gunmetal looks great on the Cement, and the Silver.

Did you get free lugs? I think Freeman ships with them free. Might be too late to ask, or maybe not. Your OEM lugs will not work with these wheels. You need ET (extended thread).

I recommend Gorrila brand.

 

Noice! What flavor?

 

Lugs included, I asked. I had rays before on my 17 and sold them to a friend before I deployed.