What Have You Done To Your 3rd Gen Today?

Well, okay, but that negative propaganda got the guy with a screw in his tire a new tire rather than repair. I can live with that.

 

Man, I’m surprised your wife isn’t mad about you wasting all this time comparing tail lights when you could just buy a set of Pro’s.

In all seriousness though you can’t tell between a depo and a pro unless you’re holding them in your hand. Yes the seam is a little bit sloppier, that’s why it’s a less expensive light.

 

TRD Pro



My limited with Depo’s



Both have a visible seam.

 

ARE Canopy and DIY bed slide. Bed slide is sheet of hardboard with Rhino shelf/drawer liner spray glued on bottom (non smooth side), with sheet of 5/8 plywood with 1X4 pine screwed on edges, and new moving blanket spray glued on the bottom. The Rhino product grips the plastic bed, and the moving blanket slides easily on the smooth side of the hardboard. I can easily pull the plywood tray out and get to the tub. I have 2 gallons of gas, tow strap, snow chains, jumper cables, towels & blanket, gloves, trailer hitch stinger, basic tools, tie downs straps, zip ties etc.

 

No I wouldn’t say that, it’s your truck it should be the way you want it. If I could find OEM lights in Canada for a reasonable price I would have gone that route, I just wouldn’t discourage others from buying depo’s because they aren’t perfect, our trucks as a whole aren’t perfect so it’s not something to get too tied up about.

In my case I destroyed a tail light trying to get into it so a depo was better than a burnt tail light lol.

 

Haha. Of course. Just planning for our next storm.

 

I'm planning a trip there soon, are there off road trails there?

 

There was during the government shutdown. Everything was fair game.

 

No cutting necessary but the air deflectors are removed. I plan to trim them to fit around the brackets so they can be reinstalled as soon as I can, although I have not noticed an increase in coolant temperature, we’ve had fairly cool ambient temps. Not sure how the removal of the air deflectors will affect coolant temps during warmer months.

 

Upgraded to @SDHQ OFFROAD HD Billet Battery Terminals

 

Already put these up in the wheels and tire section but if you didnt see it there... Scs Ray 10’s wrapped in 285 70 17 Cooper discoverer stt pros

 

I don’t have any plans. I upgraded my 24f battery to 27f, slightly bigger but enough for what my needs are.

 

I like to "get it over with" when it comes to modifications.

Bought truck last week (leftover '18 access cab OR priced well vs. the Sport I was looking for). Found 4-Runner trail wheels on eBay last week, ordered tires via Tire Buyer. Installed today. Weathertechs, radio knobs, armrest & glove box organizers, mudflaps and bed mat all earlier this week. Kicker/Subaru speakers on the way.

Now, if it would get above 10° anytime soon, could clean it up a bit.

 

Shout out to mrproduxn, I received the licence plate bracket today and install was simple.

 

Had stank in the vent for weeks and finally had a minute to spray and try to rid of it.



https://youtu.be/ZDUp4jWpT4Q

 

$17 nextzett 96110515 Klima-Cleaner Air Conditioner Cleaner - 10 fl oz

https://www.amazon.com/nextzett-96110515-Klima-Cleaner-Conditioner-Cleaner/dp/B0002Z2MKO

This stuff is great, BTW

 

Had a really bad smell coming out of my ac one of the first weeks I got the truck. So I popped the hood to see if I could find the source. Lo and behold I found a dead baby bird in the top passenger side corner of the engine bay. Got that bastard out, aired out my car with the ac blasting to rid of any left over smells and it was back to normal the next day with the help of a little tree.

 

I wonder how it got there. I checked around for any debris or dead things and nothing in site. I think I got it cleared but I'll know in a few days.

 

This is so I don't forget what type of sauce to use.