1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Sway Bar End Links All Pro? 3rd gen Rancho Loaded quickLIFT RS999915 on 285 70 17 Blisten 5100s + Eibach coils Icon RXT Leaf Pack SQEAKY! Anyone else getting 2+ inches with 883’s? Bilstein 5100’s vs Level (3G)

JBA Offroad Upper Control Arms And Suspension MEGA Thread BS thread

Discussion in 'Suspension' started by tcBob, Feb 24, 2015.

Page 141 of 207
  1. Feb 8, 2019 at 12:22 PM
    #2801
    whatjones911

    #2801
    whatjones911 Well-Known Member

    Joined:
    Feb 13, 2016
    Member:
    #178058
    Messages:
    129
    Gender:
    Male
    Vehicle:
    2018 DCSB OR 4x4 MT
    Don't forget channel lock pliers if you plan to bend the inner fender sheetmetal to get the bolt out and back in. The instructions does not mention this. Or like me if you don't want to do that, use an angle grinder to cut the bolt head off and pulled it through the other side. Do make sure you plan ahead and purchase new bolts if you go this route.
     
    whatjones911, Feb 8, 2019
    #2801
    RobP62 and m603holden like this.
  2. Feb 8, 2019 at 12:24 PM
    #2802
    m603holden

    #2802
    m603holden @Koditten Pirate Radio member #063

    Joined:
    Oct 18, 2014
    Member:
    #140581
    Messages:
    11,732
    Gender:
    Male
    First Name:
    Marteeen
    New England
    Vehicle:
    2017 Tacoma DCSB OR MT
    Lots of sail boat fuel
    [
    Did you put the bolt back in the same direction?
     
    m603holden, Feb 8, 2019
    #2802
  3. Feb 8, 2019 at 12:41 PM
    #2803
    Texoma

    #2803
    Texoma IG: Triple C Chop Shop

    Joined:
    Feb 1, 2011
    Member:
    #50374
    Messages:
    18,955
    Gender:
    Male
    First Name:
    Chris(Topher)
    Lago Vista, TX
    Vehicle:
    10 Taco 4x4
    A bunch a cool stickers, a bada ass MetalMiller Tx Longhorns grill emblem painted Hemi Orange, JBA long tube headers with o2 sims, Diff breather mod, Red LED interior lights, Fancy head unit that plays ipod n movies, Also DIY install factory stuff like, factory cruise control, factory intermittent wipers, OME nitro struts with 886x springs and toy tec top plate, JBA high caster UCA's for better alignmnet and dey beefier too, Old Man Emu Dakar leaf springs in da rear with the gear, U bolt flipper, Ivan Stewart TRD rims with 33" K Bro 2's, some bad ass weather tech floor liners so I don't muck up my interior, an ATO shackle flipper for mo travel in da rear wit the gear, also super shiny Fox 2.0 shocks back there too, all sorts of steal armor for bouncing off of the rocks like demello sliders, AP front skid, trans skid, n transfer skid, demello gas tank skid, and a tough as nails ARB bumper with warn 8k winch, I'm sure there's more
    WP_20190208_14_13_08_Pro.jpg WP_20190208_14_14_24_Pro.jpg
     
    Texoma, Feb 8, 2019
    #2803
  4. Feb 8, 2019 at 12:44 PM
    #2804
    Unchained 5150

    #2804
    Unchained 5150 Rick

    Joined:
    Sep 25, 2014
    Member:
    #139054
    Messages:
    65,410
    Gender:
    Male
    First Name:
    Rick
    Auburn Ma
    Vehicle:
    2021 TRD Poser Pro Manual.
    Nice but I'm good thanks
     
    Unchained 5150, Feb 8, 2019
    #2804
    Texoma[QUOTED] likes this.
  5. Feb 8, 2019 at 12:48 PM
    #2805
    m603holden

    #2805
    m603holden @Koditten Pirate Radio member #063

    Joined:
    Oct 18, 2014
    Member:
    #140581
    Messages:
    11,732
    Gender:
    Male
    First Name:
    Marteeen
    New England
    Vehicle:
    2017 Tacoma DCSB OR MT
    Lots of sail boat fuel
    Rick, who done your name up in your profile....
     
    m603holden, Feb 8, 2019
    #2805
  6. Feb 8, 2019 at 12:59 PM
    #2806
    Unchained 5150

    #2806
    Unchained 5150 Rick

    Joined:
    Sep 25, 2014
    Member:
    #139054
    Messages:
    65,410
    Gender:
    Male
    First Name:
    Rick
    Auburn Ma
    Vehicle:
    2021 TRD Poser Pro Manual.
    Huh
     
    Unchained 5150, Feb 8, 2019
    #2806
  7. Feb 8, 2019 at 1:02 PM
    #2807
    m603holden

    #2807
    m603holden @Koditten Pirate Radio member #063

    Joined:
    Oct 18, 2014
    Member:
    #140581
    Messages:
    11,732
    Gender:
    Male
    First Name:
    Marteeen
    New England
    Vehicle:
    2017 Tacoma DCSB OR MT
    Lots of sail boat fuel
    First Name:
    Chad Has a Tiny Pee Pee
     
    m603holden, Feb 8, 2019
    #2807
  8. Feb 8, 2019 at 1:03 PM
    #2808
    Unchained 5150

    #2808
    Unchained 5150 Rick

    Joined:
    Sep 25, 2014
    Member:
    #139054
    Messages:
    65,410
    Gender:
    Male
    First Name:
    Rick
    Auburn Ma
    Vehicle:
    2021 TRD Poser Pro Manual.
    That's in honor of @ChadsPride
     
    Unchained 5150, Feb 8, 2019
    #2808
    RobP62, ChadsPride and m603holden[QUOTED] like this.
  9. Feb 8, 2019 at 1:08 PM
    #2809
    Unchained 5150

    #2809
    Unchained 5150 Rick

    Joined:
    Sep 25, 2014
    Member:
    #139054
    Messages:
    65,410
    Gender:
    Male
    First Name:
    Rick
    Auburn Ma
    Vehicle:
    2021 TRD Poser Pro Manual.
    You are thinking your want to trade those for the ICON's
     
    Unchained 5150, Feb 8, 2019
    #2809
  10. Feb 8, 2019 at 1:18 PM
    #2810
    Texoma

    #2810
    Texoma IG: Triple C Chop Shop

    Joined:
    Feb 1, 2011
    Member:
    #50374
    Messages:
    18,955
    Gender:
    Male
    First Name:
    Chris(Topher)
    Lago Vista, TX
    Vehicle:
    10 Taco 4x4
    A bunch a cool stickers, a bada ass MetalMiller Tx Longhorns grill emblem painted Hemi Orange, JBA long tube headers with o2 sims, Diff breather mod, Red LED interior lights, Fancy head unit that plays ipod n movies, Also DIY install factory stuff like, factory cruise control, factory intermittent wipers, OME nitro struts with 886x springs and toy tec top plate, JBA high caster UCA's for better alignmnet and dey beefier too, Old Man Emu Dakar leaf springs in da rear with the gear, U bolt flipper, Ivan Stewart TRD rims with 33" K Bro 2's, some bad ass weather tech floor liners so I don't muck up my interior, an ATO shackle flipper for mo travel in da rear wit the gear, also super shiny Fox 2.0 shocks back there too, all sorts of steal armor for bouncing off of the rocks like demello sliders, AP front skid, trans skid, n transfer skid, demello gas tank skid, and a tough as nails ARB bumper with warn 8k winch, I'm sure there's more
    That was the thought in my head.
     
    Texoma, Feb 8, 2019
    #2810
  11. Feb 8, 2019 at 1:20 PM
    #2811
    Unchained 5150

    #2811
    Unchained 5150 Rick

    Joined:
    Sep 25, 2014
    Member:
    #139054
    Messages:
    65,410
    Gender:
    Male
    First Name:
    Rick
    Auburn Ma
    Vehicle:
    2021 TRD Poser Pro Manual.
    With how much cash coming my way?
     
    Unchained 5150, Feb 8, 2019
    #2811
  12. Feb 8, 2019 at 1:20 PM
    #2812
    Texoma

    #2812
    Texoma IG: Triple C Chop Shop

    Joined:
    Feb 1, 2011
    Member:
    #50374
    Messages:
    18,955
    Gender:
    Male
    First Name:
    Chris(Topher)
    Lago Vista, TX
    Vehicle:
    10 Taco 4x4
    A bunch a cool stickers, a bada ass MetalMiller Tx Longhorns grill emblem painted Hemi Orange, JBA long tube headers with o2 sims, Diff breather mod, Red LED interior lights, Fancy head unit that plays ipod n movies, Also DIY install factory stuff like, factory cruise control, factory intermittent wipers, OME nitro struts with 886x springs and toy tec top plate, JBA high caster UCA's for better alignmnet and dey beefier too, Old Man Emu Dakar leaf springs in da rear with the gear, U bolt flipper, Ivan Stewart TRD rims with 33" K Bro 2's, some bad ass weather tech floor liners so I don't muck up my interior, an ATO shackle flipper for mo travel in da rear wit the gear, also super shiny Fox 2.0 shocks back there too, all sorts of steal armor for bouncing off of the rocks like demello sliders, AP front skid, trans skid, n transfer skid, demello gas tank skid, and a tough as nails ARB bumper with warn 8k winch, I'm sure there's more
    What exactly do you have?
     
    Texoma, Feb 8, 2019
    #2812
  13. Feb 8, 2019 at 1:28 PM
    #2813
    Unchained 5150

    #2813
    Unchained 5150 Rick

    Joined:
    Sep 25, 2014
    Member:
    #139054
    Messages:
    65,410
    Gender:
    Male
    First Name:
    Rick
    Auburn Ma
    Vehicle:
    2021 TRD Poser Pro Manual.
    20181210_122702.jpg
     
    Unchained 5150, Feb 8, 2019
    #2813
  14. Feb 8, 2019 at 1:29 PM
    #2814
    Texoma

    #2814
    Texoma IG: Triple C Chop Shop

    Joined:
    Feb 1, 2011
    Member:
    #50374
    Messages:
    18,955
    Gender:
    Male
    First Name:
    Chris(Topher)
    Lago Vista, TX
    Vehicle:
    10 Taco 4x4
    A bunch a cool stickers, a bada ass MetalMiller Tx Longhorns grill emblem painted Hemi Orange, JBA long tube headers with o2 sims, Diff breather mod, Red LED interior lights, Fancy head unit that plays ipod n movies, Also DIY install factory stuff like, factory cruise control, factory intermittent wipers, OME nitro struts with 886x springs and toy tec top plate, JBA high caster UCA's for better alignmnet and dey beefier too, Old Man Emu Dakar leaf springs in da rear with the gear, U bolt flipper, Ivan Stewart TRD rims with 33" K Bro 2's, some bad ass weather tech floor liners so I don't muck up my interior, an ATO shackle flipper for mo travel in da rear wit the gear, also super shiny Fox 2.0 shocks back there too, all sorts of steal armor for bouncing off of the rocks like demello sliders, AP front skid, trans skid, n transfer skid, demello gas tank skid, and a tough as nails ARB bumper with warn 8k winch, I'm sure there's more
    Ah, I don't know, how much ya thinkin?
     
    Texoma, Feb 8, 2019
    #2814
  15. Feb 8, 2019 at 1:29 PM
    #2815
    whatjones911

    #2815
    whatjones911 Well-Known Member

    Joined:
    Feb 13, 2016
    Member:
    #178058
    Messages:
    129
    Gender:
    Male
    Vehicle:
    2018 DCSB OR 4x4 MT
    No. That would defeat the purpose of cutting the bolt off :)
     
    whatjones911, Feb 8, 2019
    #2815
    EatSleepTacos likes this.
  16. Feb 8, 2019 at 1:31 PM
    #2816
    Unchained 5150

    #2816
    Unchained 5150 Rick

    Joined:
    Sep 25, 2014
    Member:
    #139054
    Messages:
    65,410
    Gender:
    Male
    First Name:
    Rick
    Auburn Ma
    Vehicle:
    2021 TRD Poser Pro Manual.
    They are for sale right now for 660.00 shipped or I will take a Brand New pair of JBA Standard High Caster UCA's and a set of extra Ball Joints.
     
    Unchained 5150, Feb 8, 2019
    #2816
  17. Feb 8, 2019 at 1:34 PM
    #2817
    Texoma

    #2817
    Texoma IG: Triple C Chop Shop

    Joined:
    Feb 1, 2011
    Member:
    #50374
    Messages:
    18,955
    Gender:
    Male
    First Name:
    Chris(Topher)
    Lago Vista, TX
    Vehicle:
    10 Taco 4x4
    A bunch a cool stickers, a bada ass MetalMiller Tx Longhorns grill emblem painted Hemi Orange, JBA long tube headers with o2 sims, Diff breather mod, Red LED interior lights, Fancy head unit that plays ipod n movies, Also DIY install factory stuff like, factory cruise control, factory intermittent wipers, OME nitro struts with 886x springs and toy tec top plate, JBA high caster UCA's for better alignmnet and dey beefier too, Old Man Emu Dakar leaf springs in da rear with the gear, U bolt flipper, Ivan Stewart TRD rims with 33" K Bro 2's, some bad ass weather tech floor liners so I don't muck up my interior, an ATO shackle flipper for mo travel in da rear wit the gear, also super shiny Fox 2.0 shocks back there too, all sorts of steal armor for bouncing off of the rocks like demello sliders, AP front skid, trans skid, n transfer skid, demello gas tank skid, and a tough as nails ARB bumper with warn 8k winch, I'm sure there's more
    Mine aren't brand new, but I can throw in some BJ's
     
    Texoma, Feb 8, 2019
    #2817
  18. Feb 8, 2019 at 1:35 PM
    #2818
    Unchained 5150

    #2818
    Unchained 5150 Rick

    Joined:
    Sep 25, 2014
    Member:
    #139054
    Messages:
    65,410
    Gender:
    Male
    First Name:
    Rick
    Auburn Ma
    Vehicle:
    2021 TRD Poser Pro Manual.
    Nah I want all new stuff, not worried these will go.
     
    Unchained 5150, Feb 8, 2019
    #2818
  19. Feb 8, 2019 at 1:38 PM
    #2819
    Texoma

    #2819
    Texoma IG: Triple C Chop Shop

    Joined:
    Feb 1, 2011
    Member:
    #50374
    Messages:
    18,955
    Gender:
    Male
    First Name:
    Chris(Topher)
    Lago Vista, TX
    Vehicle:
    10 Taco 4x4
    A bunch a cool stickers, a bada ass MetalMiller Tx Longhorns grill emblem painted Hemi Orange, JBA long tube headers with o2 sims, Diff breather mod, Red LED interior lights, Fancy head unit that plays ipod n movies, Also DIY install factory stuff like, factory cruise control, factory intermittent wipers, OME nitro struts with 886x springs and toy tec top plate, JBA high caster UCA's for better alignmnet and dey beefier too, Old Man Emu Dakar leaf springs in da rear with the gear, U bolt flipper, Ivan Stewart TRD rims with 33" K Bro 2's, some bad ass weather tech floor liners so I don't muck up my interior, an ATO shackle flipper for mo travel in da rear wit the gear, also super shiny Fox 2.0 shocks back there too, all sorts of steal armor for bouncing off of the rocks like demello sliders, AP front skid, trans skid, n transfer skid, demello gas tank skid, and a tough as nails ARB bumper with warn 8k winch, I'm sure there's more
    Cool, let me know if you change your mind.
     
    Texoma, Feb 8, 2019
    #2819
  20. Feb 8, 2019 at 1:45 PM
    #2820
    Unchained 5150

    #2820
    Unchained 5150 Rick

    Joined:
    Sep 25, 2014
    Member:
    #139054
    Messages:
    65,410
    Gender:
    Male
    First Name:
    Rick
    Auburn Ma
    Vehicle:
    2021 TRD Poser Pro Manual.
    I won't no need to wait. I'm a very giving person but I don't know anybody that would trade over $700.00 arms for a used set of Jba's with extra Ball Joints. The JBA's that are on now with new Ball Joints are already sold for 200.00. So if you wanted to buy me a new set of Jba's for 450.00 and kick in 100.00 cash for 550.00 total I might do that. That still gives you a plus of 110.00
     
    Unchained 5150, Feb 8, 2019
    #2820
    DrFunker likes this.
Page 141 of 207

Products Discussed in

MOOG K6292 Front Upper Suspension Ball Joint for Chevrolet K1500
$27.45
LOKMAN 20 Pack 5/16" Stainless Steel Cable Clamp, Rubber Cushioned Insulated Metal Clamp, Tube Holder for Tube, Pipe or Wire Cord Installation
$11.99
TRIAX Guardian Heavy Duty Grease with Moly, True Multi Purpose, Wheel Bearings, Shock Loaded Components, Extremely Tacky, Zero Separation (2 Pack - 14 Ounce Tubes)
$24.49
Whiteline W53312 Front Control Arm Bushing, Black
$153.07
The Stop Shop Brake Line Clip Set for 3/16" tube. Pack of 10. Steel with Rubber Insulation
$9.99
Lucas Oil 10005 Red 'N' Tacky Grease - 14 Ounce
$6.98
TEKTON 7/32" Alignment Punch | 66176 | Made in USA
$21.20
IRWIN VISE-GRIP Original Locking Sheet Metal Tool, 8", 23
$27.54
LockNLube Grease Gun Coupler locks onto Zerk fittings. Grease goes in, not on the machine. World's best-selling original locking grease coupler. Rated 10000 PSI. Long-lasting rebuildable tool.
$32.99
Milton (S-3101) Pistol Grease Gun - High Pressure, High Volume
$38.75
Lucas Oil 10320 Marine Grease - 14 Ounce
$8.23
Genuine Toyota (90105-A0095) Axle Flange Bolt
$19.61
ARB D29XL Old Man Emu Dakar Extra Leaf Spring
$73.34
To Top