Official* New England Buy/Sell Tacoma Marketplace

2nd gen tow oem hitch and slightly dinged up bumper. Bumper has no rust but took a light parking lot hit. Its coming off late Feb. The tow hitch/reciever is perfectly fine, no rust on it. $100 for the pair

I could probably bend the bumper back into place with a good strap and tree...

 

Items for sale. Springs 200 on 2017 limited 15k miles. (SOLD)TRD off-road shock set 200, bought never used, was on truck 15k. Bump stops, make me an offer. Helper springs 75, on truck maybe 10k. Located Woodstock CT. Office in North Qunicy, MA. Don’t mind meeting somewhere. Also have muffler 275 one on floor 100 miles, took off on delivery

 

Might want to delete this before the ban hammer comes out

 

Not sure what you are speaking of. If I made a mistake in posting, let me know.

 

Yes you need 50 posts to sell in any part of TW, if and when they catch it you will probably be banned for 3 days

 

Yeah I know. Might be one short. Thanks for the input. Not really a rule breaker. But, I'll let it ride.

 

How hard is it to swap the tow hitch?? One of the "rings" on mine is bent from when I let a coworker borrow my truck a while back... His stupid ass bent it trying to pull a brush out of the ground.

 

iirc its just 8 or 9 big ass bolts on either side between the frame rail and the hitch itself. Dont think theres too much to it, but its been a while since Ive been under there

 

Does the bumper need to come off?

 

Not but it is still a bitch no matter how you do it. If you don't grab the Hitch I will

 

SHIET. All yours if you want it. No worries.

 

I don't need the bumper though wonder if he will split it up?

 

Any pictures of just the hitch brother?

 

Nuno, the bumper is attached to the hitch and then the hitch is bolted to the frame. We could probably bend the chain ring back if you wanted. A big pipe wrench and a piece of steel pipe should walk it back in place.

 

I can get you any pictures you want. Image a factory hitched lubed with fluid film...that's what I have. Its getting all replaced with a HC rear...I will split the bumper and hitch if needed. I will need the factory wiring harness, so you are buying the steel

 

I travel through Auburn frequently to Boston. I could drop this off. Would like to meet you as well.

 

I might take you up on that offer Paul, when the weather is nice again.

 

That's what I would do. Just need a little mechanical advantage

 

Cool. That's what I'll do then, with @vssman.

 

So you grabbing it Nuno