What Have You Done To Your 3rd Gen Today?

Put this guy in for the fun of it

 

Is this a hard mod

 

Installed raptor lights

 

Yea it’s a probably not worth it haha, about 5 hours and $160 or so.

 

Just ordered 5100 Billies for all four corners and 2885 OME springs for up front from Headstrong. Can't wait to get those installed!

 

While waiting on the FedEx Truck that’s delivering my Tonneau Cover I pulled out the rubber end caps out of the Bulkhead spacer Up against the bed rail cap, then removed the spacer bar and ran a bead of Silicone on all four sides of the end caps. Saved me from buying the OEM plugs and having to cut the bed rails. Not the neatest caulk job but it’ll be functional
Also added the rear Tack rail from my ‘14 Taco and two extra tie down cleats.
Hopefully my cover arrives alive and so I can install it this afternoon

 

I would like the signal mirrors since I don't have them (SR5).
Other than Ebay, what's a good source for mirrors?

 

The RAV4 mirror mod replaces just the mirror glass (easy swap). Pretty sure I got mine from a dealer off evilBay. If you want to replace the entire mirror assembly to get the signals... I have no idea. I'm not even sure the wiring is there for that in an SR5.

 

Do you have any details to share as I’ve been wanting to tackle this mod.

 

Which fuse did you tap into?

 

The tonneau cover you bought should come with 2 square foam pads that stick on the end of those caps and fill the gap. What you did will work also.

 

Since my ARB Bumper can’t really support a spare tire swing out, got to work on a spare tire mounting solution to free up some bed space. Pretty backyard engineered, but it beats paying $1600 for a Wilco tiregate.



Still working on it, more to follow when we are done with it.

 

Good copy on that, Thanks Everett.

 

Looks pretty good to me for "backyard engineering". I was expecting it to be made out 2x4s. Wait, maybe that's redneck engineering. I forget.

Seriously, very nice solution to your problem.

 

10A front left headlight. it's the 10a closest and in-line to the driver side fender. light kit from runnin4tacos came with an add-a-fuse

 

Got it! Lol. I have the good struts too just haven’t put them on this truck yet. But great idea. I love my mat!

 

@Ruminator LOL Appreciate it boss, I dig it. Mostly just need it to work and hold up. The 2x4 on the bed was to give me the gap between the bed floor and tire.

 

Plastidipped chrome bezel on grille, as well as the chrome TRD exhaust tip. Installed SDHQ sliders. Ordered OEM bedmat, cubby organizer, glovebox organizer and Softopper! I know this post is worthless without pics, will post 'em once I have the Softopper on.

 

i mean youve seen one OEM bedmat, cubby &glove box organizer youve seen them all lol pics of the topper would be cool. send when you got them

 

Absolutely agree haha