Keystone State Thread

Or this ^^




I didn't refresh the page in a while, so I didn't see Joe's reply

 

@Blackout14 has it right.
Bill of sale,signed and notorized
If you know a 5.0 ask to run the vin for stolen.Problem if a PO runs a tag anymore he has to have a reason.
i have purchased many cars with no title.

 

I dont have no friends... haha when I bought the other one I called the dmv and the lady told me maybe I'll call them again.

 

Send me the vin

 

Just carfax the vin number, what so complicated about that?

As stated, no title, no sale.

 

Unless this vehicle is stored in a locked garage with no windows.

If the bank really wanted it back they would have it. Not worth much with the transmission out the cost to replace or repair might have been more then the balance due.

Depending how long it sat the title may be purged from the system 3 years last I heard I have been real good no new vehicles for a few years .

I bought 2 parts vehicles 4x4 pick ups no titles no problems been 4 or 5 years

 

After sometime welding all the processes are pretty much all alike

The major difference is how the filler metal is added to the puddle( Ok Some Tig welds need no filler)

You can`t have to many grinders the thing with the 4 1/2" if they don`t fit my hand I don`t buy them

I have not used a grinding disc in quite some time since I started using the Ceramic Flap discs

 

What I like about TIG is just how well you can see exactly where you're putting the metal.

I can MIG pretty well too, my problem with stick is lack of practice, I have a hard time seeing where my puddle is actually going.

 

So far this morning 12 people have called off..

It's just a little snow people!

 

Anyone need a 27F battery? I just put an AGM in and have a year.old exide Extreme for $40.

 

I checked last night. I reused the flange nuts on my BFF bumpers, so no go. Sorry.

I have no clue on the pitch. I eyeballed it, but I have no reference whether it’s 1.5 or 1.25

 

Thanks for looking! I'll have to take one of mine off my bumper and check.

Or be lazy due to the snow/rain and order both and return whatever doesn't work. (lets be honest i'm too lazy i'll keep it in the nuts/bolts bin lol)

 

@PCTaco - did a routine maintenance check on my SmittyBilt winch last night. Fucker failed!























Wireless remote needed a new A23 battery.

All is good now.

 

Fine. I'm just waiting for taxes to get my bumper/winch.

 

Couldn't find my old ones, must have tossed them. Sorry mang. The ones on the RC are new.

 

No worries! Thanks for looking!!

 

I was out about an hour ago not to bad side roads are slick

 

Work shop is up at Breezy Park in Fleetwood; 73 and 12 seem to be getting a little hairy. I'm letting the guys go at 12:00..

 

Straighten you head and you will see them straight.

 

Most of our product goes out on 80. We're not shipping anything today and is going to cause a huge problem tomorrow since we can't run empty rendering trailers for tomorrow's production.