The GASSHOLE™ Fuel Cap holder- FREE Shipping

You're the man! Thanks for the info on the fastener. I'm gonna see if i can get it taken care of today.

 

No worries, brother! Good luck, and hope you can get that screw out!

 

Sorry you had a problem with the screw. There's no rhyme or reason as to which models have over-torqued bolts from the factory. Maybe the ones that were made in the USA plant are the tight oneshaha
If you have to replace it, a nice button head allen screw would compliment it nice.

Sorry! I just thought about it after seeing it on that calvalry blue one. I was thinking to myself, if it was color matched it would blend right in with the fuel door and look OEM AF.

The inner ring would be masked off and not get coated since it's a high wear area. I'll paint a few to test.

 

All done looks nice Thanks @mesojdm

 

Here the one that i used and it work grate to get it out

 

Nope. My 2019 SR was built in texas USA. I used a screwdriver with no problems getting the screw out. Probably the trucks from mexico that were built after lunch by someone that had an extra Burrito for lunch.

 

Wouldn’t you know....not in stock at Lowe’s or Home Depot around here. Guess it’s Amazon for me.

 

Here’s a BBPGH for ya

 

Nice. I'm thinking of doing mine Inferno , but leave the text black.

 

Might hit it with some acetone over the letters. We’ll see.

 

NICEEE. Post up installed pic. I think color matched is gonna be hotness. Spray paint or autograde color matched?

 

Got my gashole and my screw was also installed by Thanos.. Holy Shi* no reason for it to be this tight.

 

That's pretty. My last color match from spray paint for my BBP (the pro grill) turned out AWFUL, so I'm hesitant for a bit (and out of spray paint).

 

Actually, there are some decent "spray paint" in cans. Here's some BBP I did with an aerosol. All about prep, good base coat and clear

 

I’m trying a spray for this. I got an auto grade color matched as well but it seemed like it was too dark. Gonna compare the two and see what’s what. I’ll post it installed after I clear it

 

Got my gasshole today and also had an overtorqued screw. Hit it up with some Aerokroil spray, tapped it gently with a small hammer, and used the snub nose bit below. Came out just fine. Gasshole fits perfectly and is generally awesome. Very satisfied customer.

 

what's the point of the device?

 

Speaking of these.....I think I need a set to go with the quads currently being built for me.

 

Possible answers:
-It's to hold your gas cap while you fill up, so it doesn't dangle all over your fender and be generally nasty.
-It's the end that's smaller (the point that is)

 

For sure. I was able to paint my original panels you sell when I did my bhlm with the spray can and it turned out nicely. I think the issue on the grill was a wicked chemical fight (though I don't know) between the plastic adhesive primer (the goal was to paint on white instead of on black) and the result was bubbling/cracking and it just looked terrible. So I just plastidipped it back to black and bought some vinyl.

What do you usually use as the base coat?