Southeast Yard Sale Thread

Not sure about bumper compatibility, but other users may be able to shed some light. Let me know if you’re interested.

 

It should. You can double check with Erick, but I’m pretty sure Jason designed the bumper to play nice with most all aftermarket skids.

Get it bro!

 

Will my TRD work with the Baja? Is this one a better setup than using TRD?

 

Stand by. Reaching out to the bumper manufacturer about compatibility.

 

Can’t say for sure about the pro, but I would think so.

And honestly I don’t know if this would be better, equal to, or step down from your TRD Pro. Actually forgot you had the pro

Not to be a Debbie downer, but I kind like the service port on your pro.

 

I check with Erick @state48overland.
I am rolling with my TRD one. Has a little access panel for oil changes and it will fit my new bumper. Thanks for posting it.

 

Sounds good. Thanks.

 

Cali Raised 3 switch panel for 3rd gen cubby to the left of the steering wheel. I ended up going a different direction and never used this. Brand new $10 local to CLT, or add $3 to ship.
https://caliraisedled.com/products/2016-2018-toyota-tacoma-oem-style-switch-panel

 

Nooooooooo. I just saw this

 

It went fast. I pm'd him like 2 hours after he posted and it was already sold.

 

I feel a little bit better

 

Hey guys. I am going up to Black Mountain in Kentucky the second weekend of March and have some stuff I can bring along to sell if there is some interest. I plan on coming up through either the middle of Georgia, or through South Carolina and the west side of North Carolina and through East Tennessee.



2nd Gen bed rack with panels on the sides to mount accessories. $350

FJ manual transfer case. Spins freely, but the shifter boot is torn and the breather nipple is damaged. $350

95-04 Tacoma PRP suspension seat brackets. Brand new, never used. $150


2nd Gen bed bar. $40

 

I'm getting 35s installed tomorrow... what does that mean? It means that my almost brand new set of 265/75/17 Bridgestone Dueler AT Revo 3s (load range E) are going to be for sale. I had these tires installed in Tucson back in late April or early May last year. I've put less than 4k miles on them. The biggest drives were Tucson to Flagstaff (and back) and then Tucson to DC (with a 3 week stop in Dallas). They haven't seen anything worse than a dirt road (or Maryland's highways). What do I want... $600.00 cash, PayPal or Venmo. These retail for $222.99 each, so it's a pretty good deal. I'll get pictures when I have more daylight.

 

Any reason that would not fit a 3rd Gen? I would like a set of 2 for that price, or just 1 to make a removable bike fork mount.

 

Pretty sure the cargo rail to bed top height is different. The bolt holes wouldn't line up. Could be wrong though.

 

As far as I know, the holes just need to be slotted to fit a 3rd gen... The width of the actual bed is the same

 

Correct. I bought an RCI bed rack off of a third gen, the holes were slotted vertically to allow the adjustment from accessory rail to bed cap difference.

Fit perfectly, you could just see the marks where the bolts sat in a different position on the 3rd gen vs my 2nd gen

 

X2 what AugustaTaco said. I have gone back and forth and built/modified a couple racks to go on both gens.
I had the distance almost memorized cause I have done this so much.

 

Yup. Just needs to be modified. Not a direct drop in.

 

These are the tires. I'll be wheeling all weekend, but I'll be available Sunday evening and all day Monday if anyone is interested.
I've also included a picture of the beast with the new tires.