What have you done to your Tacoma today? 1st Gen Edition

some rewiring.

My roommate got a 9K Ramsey winch for $100. Just needed a ton of cleaning and a controller. I've been trying to find another project winch like that but I'm limited to what fits in my ARB bumper.

 

"Tasty"

 

soulless

 

Hit 180,000 miles today.

 

Went to Lowes for primer and paint and took a pick of the turck in the parking lot, just because. Guess that's mall crawling?



Came home and got the passenger side frame plate welded up and repainted. Krylon red primer with Krylon bedliner spray paint on top. Much happier with my welding too.

 

Hey dude,

did you take pics after you had the bushings installed? Im curious which way they go in?

@Squeaky Penguin @Blackdawg

 

Timmy to the rescue! https://youtu.be/kmaZNBp1gZM?t=1545

 

Where can you find this at?

 

LOL, I just watched that 1 minute ago! Thanks brotha

 

What @btbowie said. Pretty quick shipping too.

 

Ordered Feb 1, delivered Feb 11. Should have been the 9th but UPS failed. Not the fault of Tacomabeast there.

 

Swapped out the velcro straps for cinch straps on the un-hinged side of the RTT just now. With an additional 2" memory foam topper and my Tepui sleeping bag in the tent, it was getting pretty difficult to close. I was having to climb on top and sit on a corner to strap it closed enough to get the cover on there. Now I can do it from the ground.

 

$25 for shipping lol do they offer TW discounts?

 

Do you think this will work to strengthen a rusted frame? My buddy bought a truck with a little frame rot in that certain area and I was trying to look for something that he could weld in place.

 

Still came out cheaper shipped than the Trail Gear plates were before shipping.

 

It might, depending on how badly rusted it is. You could do the plates and then also box it to make sure it's still good and strong in your case.

 

If that’s the only problem area, it works just fine. I had to plate up the underside with some scrap 3/16ths plate as well. The passenger side rear shock mount is a perfect cup to catch dirt that’ll eat right through these frames over a dozen years (give or take)

 

Bought a rear bumper. My original bumper with weight reduction (rust holes) would not pass inspection.

 

Bought the Meguiar’s headlight restoration kit today and restored my headlights. My new corners came in so prepping for clear and shiny lights up front again.