Auxiliary Fuse Block

I'm going to add an auxiliary fuse block so I'll have ready power for some add on's I'm contemplating down the road.

So, who/what do we like for these? Thinking a 6 fuse with negative ground bus and then some sort of battery post dual connector maybe with a cut off.

 

I use these in my Camaro and very good quality !!!

https://www.leashelectronics.com/Race-Electronics_c2.htm

 

Look into a powertray

I run a power tray with fuse block, negative bar and some other stuff.

Here’s some pics of my buddies setup and mine underneath his.

https://www.tacomaworld.com/threads/powertray-and-s-tech-install.588501/

 

If you want a DIY project, building your own Bussmann RTMR/RFMR could be for you. Here's a stellar writeup on it: https://www.tacomaworld.com/threads/diy-build-and-install-a-bussmann-rtmr-fuse-relay-block.399454/

 

InstallGear 2/4/8/10 Gauge AWG Positive & Negative Battery Terminal Clamp and Shims (Pair)

$16 InstallGear 248 or 10 Gauge Battery Terminals w/Shims - Positive & Negative | Car Battery Terminal, Battery Pack, Heavy Duty Battery Terminal Connectors, 2 Gauge, 4 Gauge, 8 Gauge, & 10 Gauge Wires

https://www.amazon.com/dp/B00NQ7U982/ref=cm_sw_r_cp_apa_i_y77yCbWQ3E97V


InstallGear 4 AWG Gauge Gold Ring Set Screw Battery Ring Terminals (4 Pack)

$16 InstallGear 4 AWG Gauge Gold Ring Set Screw Battery Ring Terminals - 4 Gauge Wire Connectors (4 Pack)

https://www.amazon.com/dp/B00V59M76A/ref=cm_sw_r_cp_apa_i_R87yCbMMJFQHY


Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover

$41 Blue Sea Systems 5026 ST Blade Fuse Block 12 Circuit with Ground and Cover

https://www.amazon.com/dp/B001P6FTHC/ref=cm_sw_r_cp_apa_i_977yCb2NTHXCP

Blue Sea Systems 187 Series, 285 Series & Klixon Circuit Breakers

$85 Blue Sea Systems 187 Series, 285 Series & Klixon Circuit Breakers

https://www.amazon.com/dp/B011N4AP74/ref=cm_sw_r_cp_apa_i_X97yCb1DSE1VZ

 

This is one of the relay boards I'm running

https://www.leashelectronics.com/Pro-6-Relay-Module-Pro6.htm

 

Well that looks sweet

 

Very nice high quality !!!

 

I might see if I can retrofit that to my pelfrybilt plate

 

as a EE from Ga Tech, this is a great project..... I learned how to do it....i will be doing this soon after i purchase all the parts and supplement my tool collection...... will provide feedback.....great explanation of relays and their function for the novice.....the pictures will aid everyone.......what a great write-up.....thanks for your effort

 

Thanks for all the info. Got some studying to do.

 

What @JoeCOVA said. PowerTray and Blue Sea Systems have great products.