San Antonio

Yep, but the IFS can be used. I measured between bolt holes front to back and side to side and compared with measurements matt gave me. Will work like a charm since the front crossmember is in the same spot

 

True.

email Eddy he’s a super cool dude he should be able to help you out.

 

What about the mid skid

 

Or will the front skid cover up.the trans pan

 

I dont think the mid skid will work. I have not researched this at all though. If it uses the trans cross member at all for a mounting point, i'd say its a no go (without slight modification of course)

 

Not sure on this, maybe Matt can help us out with this one since he has the v6 auto

 

I think the IFS skid covers front end and engine oil pan, thats about it afaik. My guess is the tranny skid or mid skid are designed for the tranny oil pan

 

It don’t

the mid covers the tranny an bolts to the front skid an crossmember, xfer case requires drilling into frame. (Not that y’all care.)

 

I will take a pic of front skid to show coverage when I get home.

 

Umkay

 

Also has a cut out for easy oil changes

 

What is that adapter that screws into the pan for easy oil changes

 

Fumoto valve

 

Yea does it hang down lower then skid when installed

 

@05prerun82 heres the one I have fit perfectly
Fumoto F-103N Engine Oil Drain Valve https://www.amazon.com/dp/B003UT822G?ref=ppx_pop_mob_ap_share

 

No plenty of clearance

 

I looks like it would hang lower then stock drain plug

 

I’m like 10 min from la casa I’ll snap some peektures

 

Not by much

 

Umkay