North East CraigsList finds

Cool.

I’ve never given it any thought. It was mentioned to me that they were different.

Good to know.

 

Cost for the CBI, with center grill and headlight loops, including shipping is $585. Just finished mine a couple of days ago. It took about 30 hours from dumping out the box of pieces to final mount up of the bumper, including paint (bedliner). Everything fits together perfectly. Can probably be done much faster, as I was using a very small flux core welder, with 20% duty cycle, so lots of wait time, and I had to preheat to start my welds, to get proper penetration. Plus flux core gives you a lot of clean up too. Any questions, don't hesitate.

 

That's good info!

Dave

 

Another cap:

https://philadelphia.craigslist.org/pts/d/west-chester-toyota-tacoma-are-mx/6818778317.html

 

cool thanks Sebastian im looking into cbi now as I reply

 

Tom how where you able to match up your front skid plate doesn't cbi bumper cover stock mounting points ?

 

No, they have holes drilled, and an opening to get a wrench on the bolt head. See them above the semi-circle cut outs. That piece flips over, and the narrow side is toward the front. I'm using a long bolt, coming down through, with a nut to hold it in place, and then a nut and washer to hold the skid to that. In other words, I'll have three studs coming down from the skid.

The stock mounting points are on the bumper bar that is removed.

 

are you saying you can use stock front skid ?

 

anyone need any parts from a 1200 mile 2019 Tundra Sr5? We just finished a build on one and I'd prefer the take offs dont just get scrapped

• Front bumper (chrome) with fogs and bumper support
• Front hood scoop in chrome
• Front grille/surround(in chrome) with TSS emblem (no sensor)
• Skid plate with integrated step: https://s3.amazonaws.com/accessory-images.set.alloy.services/2019/8331/SK3000.jpg
• rear bumper - disassembled with chrome end caps

All free & pickup only

 

Yes.

 

I need a rear bumper. Where are you located?

 

@tacobell007 Tundra parts

 

West Chester, PA. I'll have pics shortly

 

Ugh they won't fit mine. But my buddy has a 2017 which those would fit on. I'll have to see how far of a ride it is

 

Hmm, that's a ways for me. Maybe I'll try the Tacomaworld Express.

 

i want that scrambler in the back!

 

That’s right down the road from me if anybody needs something picked up or stored. I travel to Jersey Shore every weekend if that helps.

 

Mobtown has a set: http://mobtownoffroad.com/product/tacoma-bed-bars/