Cooper Discoverer A/T3 megathread?

I think those are the -25mm offset F5s.

 

I'm running 0 offset



- I wonder if I could still do 295's or if I'd need spacers (which I won't run).

 

Yes, I’m running stock gearing. I’ve noticed no negative impact regarding power or anything else when compared to the 285/75’s I was running before. The 295/75 AT3 XLT’s are lighter than a lot of 285 AT’s, so the lighter weight definitely helps.

My F5’s are a -25 offset. No spacers.

 

Well, how much room do you have with the 285’s?

 

I'm just running 265's so this would be a significant jump.

 

Oh. Yeah that’d be a big jump. You’d notice a power hit with that jump and would definitely need a hefty cab mount chop and a lot of fender cutting...I’m guessing you’d need spacers or substantial negative offset in order to avoid rubbing the UCA’s as well...i did at least.

 

I'm planning on CMC and have no hesitations on cutting the fenders. I'm not sure I want to spend $1k and re-buy rims though......in retrospect I should have gone with 3.5" bs right off the bat.....may just stick with 285's or go 255 85r16 and call it a day.

Those tires look great though on your truck. I may still revisit this and see if Discount Tire has one that I could test fit just to see.

 

Cool. Great idea on the test fit. Hopefully DT can help you out! I'm glad I went with the 295's and highly recommend them. Any larger and I feel a re-gear would be necessary, though I feel my transmission likes my current set up better than the last. That probably is due to the overall weight reduction with this F5/AT3 XLT set up.

 

https://www.tacomaworld.com/threads/cooper-discoverer-a-t3-megathread.546259/page-22#post-18751299

 

Cooper Discoverer AT3-LT 235/85/16 Skinnies!

 

How those bad boys in snow up there recently .. or is Portland safe?

 

Portland only got a couple inches of snow...haven't been able to really test them in the snow yet. I'm going to head up to higher elevations to find some soon though. I'll report back.

 

I’ll likely have them on the way by then. It’ll be a big change from the duratracs in appearance but a huge upgrade in road manners.

 

Yes, road manners are great. For an AT I think they look pretty damn aggressive too!

 

I have a 2017 OR with the stock 16" wheels. Am moving to the 17" TRD wheels and wanting to add either the cooper 265/70/17 LT or 4S tires. Question - I would like to maintain my stock suspension - will I get any rub with either tire.

 

Should begood to go with that set up.

 

295/75/16 with 0mm offset?

https://www.tacomaworld.com/threads/295-75-16-with-0mm-offset.593914/

 

I’m pretty sure you’ll rub on your UCA. How wide are the wheels? Backspacing?