What Have You Done To Your 3rd Gen Today?

Freebie! Neighbor got this from his work and never used it! I use it for axes, shovel, recovery gear, straps etc.

 

Got the 15k service completed, they also did the HVAC Fan recall while it was there.

 

Wheels are 17x8 with zero offset. Just google KMC XD135 Grenade OR. Tires are BF mud terrains KM3 with the size mentioned above.

The shop recommended matching the stock wheel width which were 16x8 I believe. I’m not an expert in wheel/tires specifics but trusted the shop as they have been in biz for 20 + years. Love how everything turned out.

He did have to chop the cab a bit which is no biggie but keep that in mind.

 

Bada$$

 

Yes the Tail Harness, and Map Lights......!

 

Any rubbing?

 

How did you get them to extend beyond the fenders? Spacers? (forgive my ignorance)

 

A tiny bit. I used a heat gun and broom stick to push the fenderwell (pic 1) away then sprayed with water to cool it off. Then removed the screw from the underside (pic 2) and used a razor knife and trimmed about 1/4” of that white edge away

 

Thank you.

Cooper Maxx 255/80/17. They’re not as loud as other MT, but noticeable at highway speeds.

 

Flat matte black hood decal.



Didn't buy online...had a local shop do it.

 

Looks great, how much $ did the local shop charge?

 

$150. Probably a bit high, but it's done proper...also a more expensive 3M than other matte blacks. Yes there's several to choose from.

 

Not all was done today, but those few things were done in the last days:
- CoverKing neoprene seat covers
- Morimoto Amber fogs (look great, just wished they were a bit brighter)
- Sumo Springs installed (https://goo.gl/N8AMj2) - love them! I got a permanently installed SnugTop shell, with drawers/sleeping platform and these help a lot. I got about an inch of lift when unloaded.
- put in HIKARI Ultra LED Headlight Bulbs for my Low Beams - they are bright!
- had to replace the tailgate dampener/bushing - $6 and the gate is going down smooth again
part #, if someone needs it:


- went to the Dealer to get the AC blower motor replaced (per recall) and got the software update: ECM (PCM) to EG1810, to help with the shifting struggle. It is yet to be determined how it affects the mpg, but on the way back home it already felt better, as I didn't have to press the gas pedal as much on the uphills.

Here are the Morimotos (before I put the Hikari LEDs):

 

Not a mod, but I paid my truck off 38 months early today!

 

Best Mod ever! Hella stoked for you! Congrats

 

Good job!

 

How much did they wheels and tires set you back

 

Good deal. Paid mine off in 27 months. Great feeling.

 

Roughly 740$ for the wheels and 860$ for the tires.

 

Off the top of your head, is this applicable to ‘19s?