Fox Life!!! Anything Related to Fox Suspension

mod days are generally thrown around in the https://www.tacomaworld.com/threads/norcal-spotted-and-bs-thread.53517/page-6895#post-19687608

 

We have both the remote reservoir and DSC versions in stock and they come with free custom tuning.

 

Thank you so much for the recommendation @RangerComa

 

Soo how hard is it to adjust fox 2.5s DSCD resis while it’s on the truck?? Unfortunately, the set screw is facing the cab so not much access to it.. i guess the coilovers have to come off and readjust?

 

Yeah, if that set screw is not having out, they will have to come off.. once facing you, can just Jack up, losses said screw, and crank collar.

 

And I’m pretty sure the shop screwed up installing my rears too. The bucket wasn’t knotched or grinded to allow room for hose.. .. the fronts measured almost 25” hub to fender

 

Jesus, 25 inch?? That's crazy, what did the CV axle angles look like?? Yeah, nothing the rears can be a deal, cause the shock body can still rotate a bit, but concerning none the less. I had a shop do similar, now I do everything except aligments. Hard to find a good place to trust to do it right, and to your liking.

 

Yea probably sitting at full droop!! I took one look at my CVs and pulled out the tape measure and said NO Way!! This has got to come down to 23.5 or less.. they even had the balls to say OK but the coilovers have to come off to readjust. And we will have to charge you to reinstall and realign!! I’m pretty pissed.. I’m not paying for you to do a job that i paid you to do twice!! . Yea shoulda done it myself.. but i work 7 days a week right now.. can you say brooo lean??!!!

 

Holy good god, that's jacked up! Kind of how mine looked!!!

 

I installed mine with the set screw facing the truck, but I was able to reach around with a Allen key and loosen just enough to crank it around. It can be done without removing anything if you have patience. Just jack it up and feel around with your finger and do your best to get that key seated all the way in.

 

Same here. Had the screw facing the wrong way on the passenger side but was able to get at it. I warn everyone now to check before installing.

 

That upper bushing doesn't look right. Kinda at an angle.

 

Just grab by the Remote reservoirs and pull towards the outside/towards you, that’s what I did with mine and there is plenty of clearance

 

They do settle down quite a bit, mine almost settled almost two inches maybe 1.5 inches I can’t remember but they settled quite a bit after driving it about 10-50 miles.

 

Wow that’s a lot of settling.. i think .5” is about average..

 

Anyone have any experience with the fox level one kit from @HeadStrong Off-Road ? All I really want to achieve is leveling my front and upgrading the ride some.

 

Yeah I remember when I first put mines on, I was like sweet I have exactly 3” of lift and then I remeasured a couple days later and it was only about 1.5” of lift.

 

Wooohhh.. that’s a lots of sag.. they’ve got me set at full droop absolutely no down travel.. i could live with it at 3 to start but not 3.8.

 

Yeah that’s a lot