What have you done to your Tacoma today? 1st Gen Edition

You are correct sir.

 

I'm due again. LBJ's, new LCA's with whiteline bushings, and OTRE's. Cant wait.

Whats up @FirstTimeFirstGen We wont need to cut my cam bolts. those were done 2 years ago

 

Here’s the one I ordered 7322004140E0. I have the oak color trim in my truck

 

Depending on when you're planning the tons, you want to consider those LCAs with heims instead of lbjs.

Didnt we just do your OTREs?

 

What are heims?

 

Sorry took so long to respond! Wheelers superbumps from wheeler Offroad.

 

Smack it with a mallet. There's a c clip similar to the one that's in the diff.

 

Picked up some new wheels/tires today . My previous set is Available if anyone is interested . 305/70/16s ko2s with lots of tread life . No rock rash or chunks missing no plugs . Wheels are solid , no scratches but they were originally silver and I rattle canned them black

 

Did I spell it wrong? Heim joints? Theres stock sized LCAs you can grab with heim joints that replace the LBJ. let me see if I can find em

https://www.solomotorsports.com/sho...er/toyota-lower-control-arm-kit-stock-length/

At least that's what I was told/saw on TW. hard to tell from the pic

 

I just put mine in the vice, held the stub end straight and two smacks with a 3lb hammer it came off. It was a Napa axle though. The stub axle keeps pressure on the bearing. I'm rolling on stubs right now. The axle was just cut instead of removed though.

 

Aye guys i made these fuckers fit!! Hacked a ton! 33x12.50 15r! 2 inch spacers also replaced everything in the front end

 

Weird... Mine didn't require much hacking. What is the wheel backspacing?

 

Did u put 2inch spacers on tho? Idk my back spacing hahah i forgot but with these 12 wides & 2in spacers made it hard to stuff in but did it

 

Clocked the winch so the lever clears in engage and freewheel.

Spliced the Flatlink and loaded the line.

 

Was doing some maintenance on my front bumper and found one of the bolts holding it on came out!

What are the specs / part number for the bolts that attach the bumper to the frame ? It’s the 2 right next to each other (threads are vertical from the ground to the hood ) Can provide a picture if needed.

 

Lol..tons huh...damn you DJ


Yea..but i have life time warranty. So why not if im replacing it all.

Lol...noob

Sexy

 

No didn’t spell wrong, I honestly didn’t know what they were

 

I was just fuckin with ya dan.

 

Lost about half my horsepower a couple days ago

 

At that price, I’ll just LT the bitch. Hory chit