What Have You Done To Your 2nd Gen Tacoma Today?

dang, got my prinsu in under a week

 

Pulled the speedo out to fix a few LEDs that quit working. The tach, odo, "D" gear indicator , fuel and coolant quit one at a time over the last few months. While apart I decorated the kph.
Also while apart I changed the bulb in the fog light switch.

 

I like that little gas can. How much, 2.5 gallons?

So, not to be dumb, but whats the point of that? I mean, the diff is already solid steel. Granted idk how thick..

 

Waiting for my engine to come back from the machine shop. I have one wheel left to install arp lexus wheel studs on and do the rear brakes when they show up. Could probably install the new tob, and at least install and route the wires from my gauges.

And continue waiting for the engine

 

That back end (the circular part) isn't very thick. This just protects that in the off chance you nail it against a rock, like backing up into it for example.

 

The great educator.

 

And I suppose you do wheel harder than most everyone on here

 

He knocks mirrors off only.

 

Wiring is such a pain in the ass to me I guess I'm just too anal about having everything run neatly and factory looking. What's up with the engine just time for a freshen up or something break?

 

https://www.instagram.com/p/BpNBxCVhady/

 

Installed a cb cobra wx75st an firestik an remounted spare with some spare things laying around for a wheeling trip tomorrow.

 

Thank you for your service!!!

 

Don't let that stop you man. Took me like 3 weekends (4-5 hours each) between the super cold weather and my ocd tendencies to get my dual batteries installed But it turned out good

 

City living + cell phone camera = no flattery for photon pictures. Other than my halo parking lights the 20w fog pods are the only forward facing lightsource.

 

Oh damn that looks good. I have a spare 27f I'd like to put in the truck. It's one I took out of the camper when we did dual group 31 agm's. I'll have to mount it in the bed or something though as with a 15 I don't have the room in the engine bay

 

Today I had my Toyo Dealer install both New Valve Cover and Spark Plug Tube Gaskets and the upper Plenium Gasket too. cost just $382.00 Parts OEM and Labor. They did a great job at David Maus Toyota in Sanford Florida.2013 Tacoma V6 4.0 PreRunner! I just did all 6 Spark Plugs w/ NGK week earlier and noticed 1 Plug wet with oil when done, thats why I had the Valve Cover/Spark plug tube seals Gaskets done at dealer!

 

Thanks! I was about to get a set until I saw the KC Garage Sale thread.

 

That's a fog light? Congratulations. You're now one of those assholes driving around blinding everyone else on the road with your unaimed non-DOT "fog" lights.

 

What kind of center caps are those?