What Have You Done To Your 3rd Gen Today?

16x8, 0 offset KMC XD127 Bully wheels,
265/75/R16 E Goodyear Wrangler Ultraterrains mounted today. Took them for a test drive out to Ranchita, CA , Culp Valley in the snow, mud, and ice. Pretty stoked, they performed great. Low road noise. No Rubbing issues.

 

Does anybody know if this is a Trd pro tail light

 

Other than it being upside down, it could possibly be a limited tail light. The accent pieces look more grey than black IMHO.

 

I thought the taillight on the limited was the same as the trd pro.

 

Limiteds
FO SHO

 

Maybe time for a meso ultimate console upgrade with LED strips and PHPP (preferred hidden pistol package)

 

This also fits on top of the seats.

$39 Bedrug | Folding Track Mat / Knee Protection Mat | TrailerWare | 2' x 4' / Charcoal Grey | TW2X4MAT

https://www.amazon.com/Bedrug-TW2X4...ocphy=9023087&hvtargid=pla-598460071564&psc=1

 

Hell ya. First mod I bought when I joined TW. The cleaning was over due, like you said those damn crevices were packed with dirt and dust.

 

Hour max. Pretty easy

 

255 75 r17 is a taller tire than the 285 70 r17 I don’t think it would look small. I see a lot of guys running 255 85 16 and I think they look great. Plus you don’t have the impact on fuel economy you get with a wider tire and they are better off road in a lot of conditions.

 

I just use a 1" paint brush in those crevices on a regular basis. A soft tooth brush works good too.

 

I installed my Morimoto amber fog lights.

 

I picked that up based on feed back here... It seems to slide around too

 

oh nice im thinking of doing that with mine. any risk of anything breaking?

 

This hot this early means it’s gonna be a rough and long summer. Wait, every summer is rough and long here

 

I love Florida. Have some land there to build on one day. Had record lows of -50 with wind chills this winter here in Illinois. I would take the rough and long summer any day over the cold.

 

Nah wasn’t too bad. Just go slow, make sure you disconnect the harness for the shifter before you pull the console off all the way. Ebrake boot pulls up over the top of the brake. There are some little clips on the underside, after you take the screws out just be gentle with them.

 

Ordered... now I'm just debating on which tires to go with... I'll probably end up going with the Wildpeaks in 265/70/17

 

First wash in a while this morning.