Long Travel BS Thread

What size kit, +12”? Will that stuff tires in the stock fenders?

 

If your lights bolt into the stock location and stock fenders, yes, there is no way to reinforce them. If they’re on glass there are a couple things I did. On the two tabs that just hang in space I cut abs plastic on the other three sides and jb welded them on. Now the tabs are boxed in. And on the backside where one of the rubber groments go. I unscrewed the plug and tapped it to I think an 8mm. Then made a bracket to bolt to the truck. I’ll take pictures if I remember.

 

He wont!

 

Aight, those who run solo +3.5 my bump is around 1-1.5in away from my lower at full tuck what did y’all do if you didn’t want to get hydro bumps? Oh and another question... my bolts that connect the uniball conversion to the spindles have s lot of play in the holes. Anyone else experience this problem?

 

no idea lol 90" with these roller tires lol glass is 3.5". going to get mcniel 6". well see

 

Damn I think I’m only at 84” for a 2nd gen +3.5” and 35’s. That kit is wide!!!

 

Mines 89-90"

 

still need to get my wheels and then tires mounted and see the final number

 

Hope you didn't get aggressive offset ones haha you could really pull them back in looks like plenty of room to do so.

 

Class 7200 / 7 width is limited to 85".

 

i haven't got any yet. I have a connection at vision now so im looking at the forged 398s, definitely gonna tuck them in a little haha pretty obnoxious right now

 

Forged!? .....BALLIN

 

only cause hes a good friend of ours, he was at dirty life now hes the sales manager at vision so we get buy one get one free on anything. not my favorite looking wheel but hes an awesome dude so we are all switching over.

 

Pumped...

 

3.0 18s? Nice

 

Got the truck moved to the back of the garage. Stripped the interior out. Ready to take it out to tommy this weekend if all goes to plan.

 

Anyone got 2.0x2” king bumps for sale?

 

Damn that sounds butt clenching. Glad you’re alright. Wish I had an explanation, but let us know if they figure it out

 

I'm running wheelers super bumps up front, they work well with my camber kit. If your running the oem bumps, you could get a set of wheelers, they are a lot taller than oem, and even space them down a bit with thier poly spacers if needed to set the bump limit lower.