Torque specs on tread adjustment screw

Anyone know how tight this thing is supposed to be?

 

3 ugga duggas last time I checked

 

remember: passenger side tightens counter-clockwise!

 

I believe those are suppose to be countersunk.

 

A few more miles and it will be haha

 

Ummm...You know they make studded tires right?
Talk about doing things the hard way...sheeeeeesh!!

 

I just do 2 and a half grunts with a hand wrench

 

Good grief, for the thousandth time.....read the owners manual.

 

Here we go again, there are countless other threads on this subject. Use the search function before you post a new thread.

 

It looks cross treaded to me.

 

Looks like a 1/4 20 grade 5 so I would go with 8 FP

 

But whats that in non-freedom units?

 

Maybe that one is a lefty tighty and righty loosey

 

Somewhere somebody's Tacoma is missing a bolt.

 

looks like one or two muddafuuka's then let a pro do the rest of the work.

 

You forgot to use a lock washer.
Did you use red of blue Lock Tight
You use a German Torque Wrench and set it for, ,,,Good-in-Tight

 

You have the new and improved TPMS sensors! Must be something they are putting on the 2019's.

 

69 psi at 40 Newton turns at 60 miles per square inch

 

Don't use a cheap ass harbor freight torque wrench on that thing.

 

STOP!!! don't touch it, It comes pre adjusted/ set at the factory. Doing so will cause transmission shifting issues, rear end growling, etc.