Whats the widest tire you can put on the stock OR wheels

hey guys, just curious what the widest tire size that can be put on the stock 2019 OR wheels? I'm wanting to upgrade to some wider tires, (ones that stick out a little more) however do not want any rubbing issues AND don't want to put on spacers.

I might end up switching out the OR wheels for the TRD Pro ones ones (they look like this)
however i believe the offset and size is exactly the same as the stock OR wheels correct?
post pics of what your setups are, like i said really don't want to run spacers or do any modifications, just want a little wider look. thanks

 

Here is the stock suspension listing for max size: https://www.tacomaworld.com/threads/largest-tacoma-tire-sizes-on-stock-suspension.67550/

IMO, the TRD wheels look really nice but lack functionality due to their backspacing and small size. 265 might be all you can do, it really depends on the tire manufacturer and what they want in rim size.

 

The more poke on a wheel, the more the tires rub. The stock wheels are actually better for fitting wider tires, unless you're cramming something crazy big. But then you're cutting everything anyway.

 

Have Tacoma Pro Wheels and run 285/75/16's. Wouldn't go wider than that. It's only a 16x7" wheel

 

Do you have the same pro wheels that i put the picture of? would love to see how your setup looks if you have pictures

 

Yes and here you go:
https://www.tacomaworld.com/threads/searartist-unintentional-fake-pro-build-and-bs-thread.528835/

 

Also the offset is +12 where as the OR wheels are +25, so they poke out 1/2" more than the OR wheels (total of 1" wider track).

 

Nice looking truck! im assuming theres no rubbing issues?

 

Not now. Had to put a heat gun to the plastic fender liners to massage them a bit, and one little tab on the back side of the fender at the bottom I had to cut off (not noticeable from the exterior).

 

https://www.tacomaworld.com/threads...lifted-info-inside-complete-with-poll.514755/

 

I just read your whole setup, you have a 2' lift and 1/4 inch spacers tho....

 

Yet to be installed, my friend.

Still rolling stock suspension.

 

I'll PM you...soon enough the "you can't run 33's without 3" lift, CMC, and unicorn dust" people will be along to shit on this thread.

 

no spacers yet either? thanks for all the information you've been helpful

 

This movie used to return biweekly, then weekly, must have been a sale as it’s running daily now.

 

The stealership by my pad is selling taco with 285 75 60 nitro grapplers on 16 inch pro wheels on the or package

 

Whats the best oil i should use

 

A long, long time ago I had a K5 Blazer with 25 inches of lift and 49x21R17 tires on 17x9 inch wheels. It actually looked like a perfect fit with a 21” wide tire on a 9” wheel. Ideally, I would have gone with a much wider wheel but I got the tires for a steal and at the time, 17” wheels were widely unpopular and finding one wider than 9” was hard and very, very costly. I was also a broke high school kid.

 

I've been told the 285/75/16 will rub unless you do minor cutting. I'm wondering if you saw these on a TRD PRO taco? because if it was a PRO i think those have a different suspension setup then the ORs do.