*Gauging interest* New size in SCS Ray 10’s(17x9 w/3.5”bs)

Must be a really shitty shop doing work for you. I generally set my castor between 3.0-3.5. I tried 4.0 before and it drives like shit. Return steering was also horrible.

 

Good to know.. I’ve heard between 3-4 is ideal but i wasn’t sure of driving differences.. i told them between 3-4.. hopefully I’m around 3.5

 

Yup it’s pouring rain and almost dark.. but it rubs pretty bad on driver side lower flare tuning.. passenger is all good.. also VSC light is on.. pretty sure my alignment has something to do with both problems.. shop was unable to give me alignment specs even though i asked them numerous times.. they just suck.. going elsewhere for alignment.. and everything else for that matter.

 

Where are you from?

 

2.5" only up front but no rubbing with the 295??

 

I got about 2.5” up front and I don’t rub with 285/75/17.

 

South Florida sir

 

Where in south Florida? I’m relocating back to south Florida myself here next week.

 

No sir it rubs for days.. forward liners and driver flare

 

Deerfield Bch

 

Nice I’m on the opposite coast but right on line with you.

 

Just gotta start chopping away if you want it to work.

 

Yup.. can’t make left turns too well.. a few guys made this work with just CMC and pinch.. going to re check alignment at a buddy’s shop tomorrow and chop from there..

 

A lot of guys are probably just turning their steering on the driveway and telling you that. I rubbed quite a bit when I was running my 295s with 1.25” spacers on a 0 offset wheel.

 

285 are good.. but i had to trim and massage the fender liners on top of the CMC and pinch weld.

 

yikes!!!

 

Yup!! Probably true.. passenger has good clearance but not the driver side and there isn’t much ‘lean’ to speak of.... that’s why my suspicion lies in the alignment..

 

i will post pictures of the "OVERKILL" i did on my fender liners.. lol

 

Please do sir..

 

My fender liner has been off. Lol