Ontario BS Thread

ouuuuuuuuuuuuu




P.S how much does that All Pro bumper weigh roughly? you think I should put some 886's upfront?
maybe @KenLyns can chime in.

 

What shocks are you on now 885’s?

 

buddy on here is an ambassador for SOS and this is his 10% off code

Traillimo

 

887

 

On their site it says TAXTIME.

 

added some kriptonite to my Taco

 

Volunteer firefighter?

 

no sir

 

I would say 70-80lbs. I'm currently running 885 with a 1/2" spacer. Keeps me at 2.5-2.75 lift in the front. If your getting a winch I'd go with 886. I have a pair of ome nitrocharger and 886 in the garage that I'm switching out for.

 

nah no winch with this bumper, I will at some point tho once I upgrade the bumper. I might hold off on 886's for now and just see what happens

 

Did some painting today on new wheels, how long will it last?

 

It's about 135 lb with the light hoop, if I remember correctly from All-Pro's web site.

 

if u put them on in the summer then I give them until a few months into winter. the snow acts like sand paper IMO but depends on prep/paint if u put clear coat. I did a quick half assed paint job on buddies rims in the fall and now they are missing some paint

 

You’ll be fine with the 887’s. You’ll loose some lift worst case. I did run 886’s with just a bumper no winch. Was fine.

 

maybe I will get my rake back damn arse end of my truck always looks like sagging

 

Did you just do the fronts?

 

no no, whole truck was listed, but for some reason it just looks like my ass hangs low. I think its mostly just an illusion but I wouldn't mind having some rake back. when I do the HC im going to change to some different leafs

 

What’s in the rear?

 

5100 and 3 leaf AAL. new leaf springs summer of 2017 cuz the recall

given the whole lift was used, got the AAL from Thyces and I know he loads up his truck with tools for work so im sure they are just tired hahaha either way, new leafs will be needed for the HC anyways

 

Fair enough. Highly recommend the Dakar’s. Don’t mess around, go with the HD kit.