Lets see your most Unique Mod

Wired my Hella 500's up to an extra foglight switch (the one on bottom). Using the existing blanks and 12V power, didn't have to run extra wire or cut extra holes:

 

nice and clean

 

nice work with the enclosure

 

nice switches guys

 

Painted exhaust tip black.

 

My gauge holder is the only unique thing I have done other than swapping black leather headrests form a Lexus to replace the gray fabric.

I never did finish what I started because I'm going to redo it someday and add a 3rd guage anyway. Next time I will probablly use imitation carbon fiber sheet and trim around the edges.

 

Cool mod, I was actually thinking of doing something similar with that spot, like a center channel speaker.

 

This has a cheap part and an expensive part. The expensive part was the custom wrap arround bumper. Once that was in, I realized I could use the space on the sides for storage. I just needed to remove the plastic cubby and make a new cover. I used adhesive magnetic strip to hold the cover in place.

Step one: remove the plastic cubby

Step two: make cover out of 3/8" ABS plastic

Step 3: attach magnetic adhesive strip. This figure shows two layers of magnets. The first layer is stuck to the new door, the second layer is stuck to the first layer magnetically. This allows marking the position of the holes using the old cubby. The holes are needed because the bolts for the old cubby are not flush with the bed. This way I get a good dust proof seal.

Step 4: attach the magnetic strip to the bed. This is done by pealing the adhesive strip off the magnet and carefully placing the new door into position. You can't just stick the magnets to the bed because the magnetic strips only stick to each other if the rows of magnetic polarity are alligned. That is why step 3 is necessary.

Once the magnetic strip adhears to the bed, the door can be removed for access. It pops snugly into place when you put it back.

The new storage space is big enough for everything that I used to keep in a large ammo can, plus a plastic tarp, ARB tire repair kit, and a small bag of bungie cords. I never used the 120V outlet so I just secured it inside the space with some zip ties.

 

thats sweet man ^^^

 

I cut some teeth out with window tint and stuck it as an eyebrow for the yota.

 

Theres alot of cool mods on this thread. Lots of good Idears!

 

truck looks sick

 

NGP CB Firestik Antenna mounted with 3M tape...its worked out pretty well so far

 

Turned the body of my truck around backwards so I could have a front wheel drive tacoma. LOL JK

 

aftermarket bucket seats

 

Nice!!!

 

Still not done with that exhaust ?? lol. I want your motor. So just let me have it already. I only have enough for the heads to be done. I'm doing double springs though.

 

Where did you get the USB replacement plug?? I like that idea!

 

mp3car.com