3rd Gen Safari Snorkel Install - How To Article

The bulkiness has a purpose. I think it’s supposed to have 10 percent improvement in airflow than the older ones. I just got mine and it looks great.

 

It just seems like it'l suck in more dirt facing forward. There's no real ram air effect going on, the engines aren't designed for that.

But yeah I do like the way they look, when it's swept back it's less of an obstruction.

 

So I followed your instructions perfectly and everything turned out very well except for the tape holding the snorkel onto the A-pillar. I used the same tape as you and it keeps coming off. Any suggestions?

 

Appreciate the detailed guide with your added tips.

 

I just ended up drilling holes. Now it’s super stable.

 

I just used this write up to install my snorkel! I really appreciate the help brother!

 

I want to thank - Hodakaguy ! I followed this write to the tee, job completed - start to finish, 4hours, 40minutes. Looks like a professional did it.

Definitely would not of been as easy without reading this article, and the step by step pictures, great job !!

 

Yeah hodakaguy is a stud .

 

great write up! I installed on on my 5th GEN4runner....getting ready to do it to my Taco!

 

Write up was spot on! Took about 2.5 hours. I painted the bare metal and then hit it with plastidip so 20/30min was drying time. The bolt above the tube that goes to the airbox was a bitch!!! But all done now! Thanks

 

Glad to see the How-To article is being used and helping in the install of many snorks , thanks for the comments and feedback!

Hodakaguy

 

I'll be attempting this tonight. Thanks for the great write-up!

 

Anyone make the ARB snorkel work with Bushwacker? Snorkel’s installed...Bushwackers purchased

 

Greatest write up I’ve seen so far! Awesome. Takes balls to cut into a new truck fender.

 

nice write up!

 

Serious attention to detail on this DIY. Thank you for the time and effort!

 

Great write up!

Thanks man

 

Thanks for this, helps out a lot with my own project!

 

Been thinking about a snork. I need to see if it will clear Caliraised ditch lights and an UpTop Bravo rack.

 

Thank you for this write up, was a guiding light in my install today. Screw those top front last bolts on the snorkel, ratcheting wrench is the way to go. Used the 3m tape, breathes so much better and a little bump up in MPG, actually breathes better than the AFE air scoop setup I had prior. Hats off to you and if I ever run into you I owe you a drink good sir.