What Have You Done To Your 2nd Gen Tacoma Today?

INTERSTATE,MEGATRON,cant go wrong

 

Installed my rear Sumo Springs with Wheelers 9/16" u bolts the other day. I had to throw them in a vise and bend them more, they were all too wide to fit in the brackets. Oh well, they were only $45 shipped so I can't complain. I just used the stock u bolt from each position as a guide. Best $230 I've spent on this truck aside from the 5100s and SCS wheels. Also got a half inch of lift, which is nice because the rear was starting to sag a tiny bit after about 4 loads of oak riding on the factory bumps off road and all the way to the grandma's house.

 

I ended up redoing it. 5/16”x1” steel spacer with heat shrink around it.

 

That look's much better,It's funny the reaction us fellow TW members got when we saw all those washers.

 

Took advantage of the nice weather to scrub the winter off the truck. Also did alittle maintenance on the bottle opener mounted in the bed. Summers comin and a man has to be ready

 

Remedied my braking shake by replacing my stock front rotors and shoes with StopTech slotted rotors and ceramic shoes. I suspected warped rotors was causing the shake when I slowed down between 40 and 50 and I guess I was right cause the shake is now gone. Plus it gave me a good reason to start my Saturday morning with some country music and Modelo beer.

 

Removed my ski rack and mounted my Roam Adventure rugged case on the roof rack

 

PM me ur address and when the 15 bucks hits my PayPal, I'll send it bugdoctorchris@hotmail.com is my PayPal

 

Private property

 

Oh I’m sure, or maybe a private race track. In Mexico.

 

Did the front differential drain n refill w/ Redline 75w85. 85k miles. The old fluid looked dirtier than the rear differential. Didn’t use the pump - gravity fill using a clear tubing through the engine compartment worked perfectly.

 

Good deed for the day. Pullled out the mailman who somehow got stuck in the last snow drift on our street. Think I may need a to replace my strap.

 

Installed some wicked two-axis side mirrors. Visbility Level = 10,000

 

Thanks for the heads up anyways man!

 

*heavy breathing*

Time to rip them off on some trees.

 

Group 31.

Those straps scare me just looking at them.

 

Pics from inside!! I think I need this

 

Here's a pic of the driver's side. Sort of hard to tell from the pic but in the corner mirror piece my rear tire and slider kickout is visible.

 

Started my bumper kit today went pretty good. Still a lot of welding to do on this thing and a ton of grinding, for a first time welding I don’t think is going to bad. Need to straighten the passenger hoop and fix notch on the driver side .