Delete

I’m game!!! Hope I don’t miss out again!

EDIT: I’ve seen many other posts/versions but this is the one that just looks OEM and right! Maybe a bit more costly, but I’d pay for a good fit over just a 1” Dor/Hill spacer any day!

 

Did mine today and they work great, however the bolts I bought didn’t come with washers. Are washers necessary?

 

If your bolts are flare head, then no. If they are standard head, then yes.

 

Can I please get 2 sets when they are available again?

 

Please add me to the list for one set when you have them available. I currently have the cheap Hillman spacers and they do the job but look like sh*t. Yours are a work of art. Thanks.

 

@Banker
@TWTaco
@05Taco4x4
@Moots34
@B1sko3
@El Taco Blanco
@electric taco
@Fredomart
@Hans7
@Vic916Taco
@Wingman
@The Schwartz
@tacoburn327

I willl post the order form link on Monday, noon-ish(Eastern).

 

Any chance you could do a pair with 3/4” height? The 1” is just a bit too tall for me.

 

I will be offering shorter spacers, but I am waiting on material for those. Each size of the aluminum spacers require different bar stock dimensions to keep production efficient, otherwise I need to charge more to rough them down.

1/2" is doable with the material I purchased to make the extensions, I do have this in stock.

If I damage a set of the 1"(it happens), I will make them 3/4" at no additional charge, but if you hang tight I will get material in and be able to make them for cheaper.

 

Put me down for a set of 1" spacers next run and I would also like a set of those add 1/2" spacers to add to the std spacers as well.

 

You will definitely be able to get in on this run, I have 28 pairs of 1". Monday at noon Eastern I will post the link for ordering.

 

When will you have the 1/2" spacers available to add to the 1" ones?

 

I will make those to order, but they should only take me about an hour. I have enough material saw cut for 7 pairs of those.

 

Sweet. I like the fact that you can stack them to really dial in what best works for you.

 

Thanks, count me in if you drop a set or when you get the new stock in.

 

(Edit:Qty) 4 pairs available (one pair per seat)

Order 1" spacers through this link. -- https://goo.gl/forms/UnTuD7Mt1dycyUk52
(Do not worry if you need to fill the form out more than once.)

Fill out the form, and then PM me if you also want 1/2" extensions (those will be $50 per pair).

Those who order before Friday will likely have their spacers shipped by 3-25.

 

Just ordered 2 pairs. Thank you!

 

Payment sent for 1 pair. Thanks.

 

Ordered 2 sets! Didn't miss out on this go around!

 

I'm holding out for the 1/2 or 3/4 ones. I think 1 inch is going to be to tall for me.

 

I am 6’. Will the 1” spacer be too tall for me?