1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Best way to remove this clip? Upper Radiator Support Cover [Sight Shield] N-Fab Steps Rust Prevention - paint w/ Rustoleum Bedliner spray? Headlight Replacement Recommendations Review of All The Random Stuff I've Bought for The Taco (w/Links) Help wiring ARB CKMA 12 compressor to CH4x4 switch

Need Help....and change your own oil...

Discussion in '3rd Gen. Tacomas (2016-2023)' started by nevadabugle, Mar 17, 2019.

Page 1 of 3
  1. Mar 17, 2019 at 1:52 PM
    #1
    nevadabugle

    #1
    nevadabugle [OP] Desert Rat

    Joined:
    Jul 25, 2014
    Member:
    #134701
    Messages:
    3,991
    Gender:
    Male
    Elko, NV
    Vehicle:
    2016 DCSB TRDOR manual in quicksand
    Well...this is what I get for trusting the dealership to change my oil.

    The last oil change was at the dealer and apparently they did not read the spec sheet on torquing down the oil filter housing. It's only supposed to be 19 foot pounds.

    When I tried to change my oil today it was so tight that not only would it not turn but I first broke the cap wrench then busted the tabs off the plastic housing...:annoyed:


    Anybody have any ideas on how to get this loose? I'm tempted to put the plug back in the bottom, fill it up with oil and drive with the dirty filter until I can get it to the dealer in two weeks.

    Angry does not even begin to describe my mood right now.20190317_134358.jpg
     
    nevadabugle, Mar 17, 2019
    #1
    tonered, TXpro4X4 and jerkwithkeyboard like this.
  2. Mar 17, 2019 at 1:56 PM
    #2
    JoeCOVA

    #2
    JoeCOVA Well-Known Member

    Joined:
    Nov 15, 2016
    Member:
    #202463
    Messages:
    9,656
    First Name:
    Joe
    Colorado Springs
    Vehicle:
    Ford F350, Lexus RX450h, FZJ80, Jeep YJ, Jeep LJ
    Definitely upgrade to the aluminum cap!!

    I would run the old filter til the new cap comes in then rip that plastic one out.
     
    JoeCOVA, Mar 17, 2019
    #2
    SandyTaco4x4, xxTacocaTxx and stun gun like this.
  3. Mar 17, 2019 at 1:57 PM
    #3
    Lawfarin

    #3
    Lawfarin Who me?

    Joined:
    Oct 25, 2015
    Member:
    #167659
    Messages:
    7,921
    Gender:
    Male
    First Name:
    Beetle Juice
    NY
    Vehicle:
    2024 GMC Sierra
    The plastic swells. You can set it at the factory torque spec and it still be a bitch to get back off.
     
    Lawfarin, Mar 17, 2019
    #3
    TartanEagle, CanisLupus, koditten and 7 others like this.
  4. Mar 17, 2019 at 1:57 PM
    #4
    jerkwithkeyboard

    #4
    jerkwithkeyboard Well-Known Member

    Joined:
    Feb 15, 2016
    Member:
    #178231
    Messages:
    981
    Gender:
    Male
    Western suburbs Chicago, ILL
    Vehicle:
    2016 TRD Sport DCSB Inferno 4x4, loaded /JBL/Tonneau Cover/ Roof Rack
    17" Black TRD rims Tacoma Stainless Steel Rear Tailgate Letter Inserts Brake light flasher Center LED 110v and 2-3amp USB plugs mod in back seat center 400w on all the time mod SSR-610-40 SumoSprings 32 INCH 180W CREE LIGHT BAR (5D ) AUXBEAM BedStep and Pop & Lock Power Tailgate Lock Blue LED glove box light (fix no light) Bed light Blue LED's Wired to turn on when Gate is opened Tempered Glass Center Touch Screen Protector Rear Camera anytime Navigation Bypass ( a must) Rexing V1 3rd Generation Dash Cam hard wired in OXILAM 912 921 LED Reverse Light 2000 Lumens TRD Pro Grill TRD Skid plate
    that's what i would do as you can still drive it.

    i also put the aluminum cap on ... The first time i tried to change mine i almost snapped it... sucks but i think you should be able to get if off , or make the dealer do it ...

    maybe if the oil was warm it may move, some

    Also you can get the new cap and wrench as a combo pack on Amazon

    Genuine Toyota 15620-31060 Oil Filter Cap Assembly

    $22 Toyota Genuine Parts - Cap Assy, Oil Filter (15620-31060)
    https://www.amazon.com/Genuine-Toyo...=B008BHP68A&psc=1&refRID=CMHEKBCFQ43Z9S0BVQ5D


    https://www.tacomaworld.com/threads/aluminum-oil-filter-housing-15620-31060.491664/
     
    Last edited: Mar 17, 2019
    jerkwithkeyboard, Mar 17, 2019
    #4
    skyking3, MrBrooks, patdeezy and 1 other person like this.
  5. Mar 17, 2019 at 1:58 PM
    #5
    s.e.charles

    #5
    s.e.charles Well-Known Member

    Joined:
    May 26, 2018
    Member:
    #254537
    Messages:
    965
    share a source for said aluminum cap? thanks
     
    s.e.charles, Mar 17, 2019
    #5
  6. Mar 17, 2019 at 1:58 PM
    #6
    Flash1034

    #6
    Flash1034 Well-Known Member

    Joined:
    Oct 29, 2010
    Member:
    #45429
    Messages:
    1,170
    Gender:
    Male
    N/W Montana
    Vehicle:
    2023 Toyota Tacoma TRD Pro, Solar Octane, Automatic
    MESO Stage 1.5 LED Taillights Falken Wildpeak AT3W Tires in 265/75-16
    Strap wrench
     
    Flash1034, Mar 17, 2019
    #6
    czach, shakerhood, 02Duck and 1 other person like this.
  7. Mar 17, 2019 at 2:02 PM
    #7
    stun gun

    #7
    stun gun Well-Known Member

    Joined:
    Nov 18, 2016
    Member:
    #202729
    Messages:
    14,045
    Gender:
    Male
    First Name:
    Aaronski
    Vehicle:
    Tacomas.
    17 4X4 sr5spd/01 LT sr5spd
    Old filter will be fine until you get a replacement.
     
    stun gun, Mar 17, 2019
    #7
    GillyLink and shakerhood like this.
  8. Mar 17, 2019 at 2:06 PM
    #8
    nevadabugle

    #8
    nevadabugle [OP] Desert Rat

    Joined:
    Jul 25, 2014
    Member:
    #134701
    Messages:
    3,991
    Gender:
    Male
    Elko, NV
    Vehicle:
    2016 DCSB TRDOR manual in quicksand
    Do you guys know, if I fill it back up now, then get the aluminum cap ordered, can I replace the filter without draining all my oil out. Hate to loose 6 quarts of fresh oil.

    Or when I pull the filter will all the oil drain?
     
    nevadabugle, Mar 17, 2019
    #8
  9. Mar 17, 2019 at 2:09 PM
    #9
    jerkwithkeyboard

    #9
    jerkwithkeyboard Well-Known Member

    Joined:
    Feb 15, 2016
    Member:
    #178231
    Messages:
    981
    Gender:
    Male
    Western suburbs Chicago, ILL
    Vehicle:
    2016 TRD Sport DCSB Inferno 4x4, loaded /JBL/Tonneau Cover/ Roof Rack
    17" Black TRD rims Tacoma Stainless Steel Rear Tailgate Letter Inserts Brake light flasher Center LED 110v and 2-3amp USB plugs mod in back seat center 400w on all the time mod SSR-610-40 SumoSprings 32 INCH 180W CREE LIGHT BAR (5D ) AUXBEAM BedStep and Pop & Lock Power Tailgate Lock Blue LED glove box light (fix no light) Bed light Blue LED's Wired to turn on when Gate is opened Tempered Glass Center Touch Screen Protector Rear Camera anytime Navigation Bypass ( a must) Rexing V1 3rd Generation Dash Cam hard wired in OXILAM 912 921 LED Reverse Light 2000 Lumens TRD Pro Grill TRD Skid plate

    post #4
     
    jerkwithkeyboard, Mar 17, 2019
    #9
    JoeCOVA likes this.
  10. Mar 17, 2019 at 2:10 PM
    #10
    nevadabugle

    #10
    nevadabugle [OP] Desert Rat

    Joined:
    Jul 25, 2014
    Member:
    #134701
    Messages:
    3,991
    Gender:
    Male
    Elko, NV
    Vehicle:
    2016 DCSB TRDOR manual in quicksand
    I have ordered the aluminum cap. But I still need to figure out how to remove the one I got.
     
    nevadabugle, Mar 17, 2019
    #10
  11. Mar 17, 2019 at 2:10 PM
    #11
    JoeCOVA

    #11
    JoeCOVA Well-Known Member

    Joined:
    Nov 15, 2016
    Member:
    #202463
    Messages:
    9,656
    First Name:
    Joe
    Colorado Springs
    Vehicle:
    Ford F350, Lexus RX450h, FZJ80, Jeep YJ, Jeep LJ
    I'm pretty sure I remember replacing the filter first and then draining the oil when I did my oil change.
     
    JoeCOVA, Mar 17, 2019
    #11
  12. Mar 17, 2019 at 2:12 PM
    #12
    Modesto Tacoma

    #12
    Modesto Tacoma Well-Known Member

    Joined:
    Mar 2, 2015
    Member:
    #149947
    Messages:
    733
    Gender:
    Male
    central california
    Vehicle:
    LIMITED 4X4
    This won't void your warranty? Just asking.
     
    Modesto Tacoma, Mar 17, 2019
    #12
  13. Mar 17, 2019 at 2:14 PM
    #13
    Flash1034

    #13
    Flash1034 Well-Known Member

    Joined:
    Oct 29, 2010
    Member:
    #45429
    Messages:
    1,170
    Gender:
    Male
    N/W Montana
    Vehicle:
    2023 Toyota Tacoma TRD Pro, Solar Octane, Automatic
    MESO Stage 1.5 LED Taillights Falken Wildpeak AT3W Tires in 265/75-16
    The aluminum one is exactly the same...just aluminum
     
    Flash1034, Mar 17, 2019
    #13
  14. Mar 17, 2019 at 2:15 PM
    #14
    jerkwithkeyboard

    #14
    jerkwithkeyboard Well-Known Member

    Joined:
    Feb 15, 2016
    Member:
    #178231
    Messages:
    981
    Gender:
    Male
    Western suburbs Chicago, ILL
    Vehicle:
    2016 TRD Sport DCSB Inferno 4x4, loaded /JBL/Tonneau Cover/ Roof Rack
    17" Black TRD rims Tacoma Stainless Steel Rear Tailgate Letter Inserts Brake light flasher Center LED 110v and 2-3amp USB plugs mod in back seat center 400w on all the time mod SSR-610-40 SumoSprings 32 INCH 180W CREE LIGHT BAR (5D ) AUXBEAM BedStep and Pop & Lock Power Tailgate Lock Blue LED glove box light (fix no light) Bed light Blue LED's Wired to turn on when Gate is opened Tempered Glass Center Touch Screen Protector Rear Camera anytime Navigation Bypass ( a must) Rexing V1 3rd Generation Dash Cam hard wired in OXILAM 912 921 LED Reverse Light 2000 Lumens TRD Pro Grill TRD Skid plate
    Shouldn't ? as long as the dealer isn't a dick about it and they did the last one AND you have the right wrench for it i would think not...

    Its for getting it off the cap. not the replacement cap,,, No problem with the cap as it is OEM toyota
     
    jerkwithkeyboard, Mar 17, 2019
    #14
    MoneyMan55 and Modesto Tacoma[QUOTED] like this.
  15. Mar 17, 2019 at 2:22 PM
    #15
    nevadabugle

    #15
    nevadabugle [OP] Desert Rat

    Joined:
    Jul 25, 2014
    Member:
    #134701
    Messages:
    3,991
    Gender:
    Male
    Elko, NV
    Vehicle:
    2016 DCSB TRDOR manual in quicksand
    Well, plan B is a failure. When the tab broke off it cracked the plastic housing. Soooo, truck is dead until I get this one off and replace with another.

    Still having no luck budging this thing. Strap wrench is a no go.
     
    nevadabugle, Mar 17, 2019
    #15
  16. Mar 17, 2019 at 2:22 PM
    #16
    TacomaLite

    #16
    TacomaLite Member

    Joined:
    Jan 28, 2019
    Member:
    #281027
    Messages:
    15
    Gender:
    Male
    First Name:
    don
    massachusetts
    Use the 27mm on wrench not 3/8
    to loose that thing
     
    TacomaLite, Mar 17, 2019
    #16
  17. Mar 17, 2019 at 2:34 PM
    #17
    TacomaLite

    #17
    TacomaLite Member

    Joined:
    Jan 28, 2019
    Member:
    #281027
    Messages:
    15
    Gender:
    Male
    First Name:
    don
    massachusetts
    Get a hose clamping on plastic housing
    Get the strap wrench over the hose clamp
    May work that way
     
    TacomaLite, Mar 17, 2019
    #17
    nevadabugle[OP] and Flash1034 like this.
  18. Mar 17, 2019 at 2:35 PM
    #18
    Wengel21

    #18
    Wengel21 Well-Known Member

    Joined:
    Jun 6, 2017
    Member:
    #220898
    Messages:
    346
    Gender:
    Male
    First Name:
    Ben
    SoCal
    Vehicle:
    2017 DC LB TRD OR
    Pep boys tends to carry the aluminum housing for the Tacoma, at least the two by my house did. It’s worth a phone call if you want your truck up and running
     
    Wengel21, Mar 17, 2019
    #18
    nevadabugle[OP], Modesto Tacoma and Vbpiper like this.
  19. Mar 17, 2019 at 2:40 PM
    #19
    nevadabugle

    #19
    nevadabugle [OP] Desert Rat

    Joined:
    Jul 25, 2014
    Member:
    #134701
    Messages:
    3,991
    Gender:
    Male
    Elko, NV
    Vehicle:
    2016 DCSB TRDOR manual in quicksand
    Thanks all. I got it off finally. I had to wedge the cap wrench on to the housing with a piece of sandpaper inside the wrench for purchase. Then grabbed the outside of the cap wrench with an 18" pipe wrench....

    And it still took all my might to break it free.
     
    nevadabugle, Mar 17, 2019
    #19
    Toynado, scottalot, gurneyeagle and 2 others like this.
  20. Mar 17, 2019 at 2:46 PM
    #20
    Bot_Chu

    #20
    Bot_Chu Du Ma

    Joined:
    Oct 14, 2015
    Member:
    #166623
    Messages:
    1,127
    Gender:
    Male
    First Name:
    Nate (Bot)
    Corona, Ca
    Vehicle:
    2007 ACLB Prerunner
    Enkei RPT-1, ADS 2.5 F/R, 4" Spindles, Toyo RT 315/75/16
    I’ll link the best oil filter wrench to use any of the ones that use a teeth suck in my opinion. Broke a housing like this one time because of the poor design. Also snapped the head of the tool once & bent one. This will let you get all the torque down on the housing without stressing the weak points.

    Forged Toyota Lexus Scion Oil Filter Wrench-Chrome Vanadium- 64mm 14 Flats
    $39 Tool Guy Republic Forged Chrome Vanadium Oil Filter Wrench Socket for Toyota, Lexus, Scion, Type Oil Filter Housings - 64mm 14 Flats
    https://www.amazon.com/dp/B01B8O0BFU/ref=cm_sw_r_cp_api_i_3.RJCbS26ZN9D
     
    Bot_Chu, Mar 17, 2019
    #20
    DavesTaco68, scottalot, gurneyeagle and 1 other person like this.
Page 1 of 3
To Top