1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Dual Battery Wiring Question Oil Filter is STUCK Gear Oil Question Relay for locker solenoid? Plasma cutter, bang for the buck? 5VZ-FE, 3.4L V6, Detailed Post on Performance Problem. Please, PLEASE Offer Informed Input

Official Crawlbox BS thread!

Discussion in 'Technical Chat' started by HomerTaco, Mar 16, 2016.

Page 38 of 175
  1. Mar 17, 2019 at 5:05 PM
    #741
    ovrlndkull

    #741
    ovrlndkull STUKASFK - HC4LIFE

    Joined:
    Jan 7, 2017
    Member:
    #206806
    Messages:
    37,785
    Gender:
    Male
    First Name:
    Skip
    Burlington, NC
    Vehicle:
    2005 DCLB Silver
    63s, XD Machete, Beat not Babied
    Yes that is correct. Just looking at alternatives to the MC as that seems to be the only built unit available today.
     
    ovrlndkull, Mar 17, 2019
    #741
  2. Mar 17, 2019 at 5:14 PM
    #742
    Snowy

    #742
    Snowy Is neither here nor there

    Joined:
    Feb 5, 2014
    Member:
    #122349
    Messages:
    3,455
    Gender:
    Male
    First Name:
    Connor
    Winnebago, IL
    Vehicle:
    3 linked 98 Xtra cab
    Stock-ish
    Why not just just build one yourself with TG plates and a donor box? Honestly building the case is probably one of the easier parts of installing duals
     
    Snowy, Mar 17, 2019
    #742
    jubei and ovrlndkull[QUOTED] like this.
  3. Mar 17, 2019 at 5:20 PM
    #743
    ovrlndkull

    #743
    ovrlndkull STUKASFK - HC4LIFE

    Joined:
    Jan 7, 2017
    Member:
    #206806
    Messages:
    37,785
    Gender:
    Male
    First Name:
    Skip
    Burlington, NC
    Vehicle:
    2005 DCLB Silver
    63s, XD Machete, Beat not Babied
    That is kinda my thought. And I would completely get rid of chain drive tcase and go with a gear driven one. Since I can't find an adapter to go back to either the tacoma/fj case after the doubler.
     
    ovrlndkull, Mar 17, 2019
    #743
  4. Mar 17, 2019 at 5:31 PM
    #744
    Snowy

    #744
    Snowy Is neither here nor there

    Joined:
    Feb 5, 2014
    Member:
    #122349
    Messages:
    3,455
    Gender:
    Male
    First Name:
    Connor
    Winnebago, IL
    Vehicle:
    3 linked 98 Xtra cab
    Stock-ish
    I didn’t realize TG didn’t make a gear drive to second gen chain drive adapter...bummer. Then your either into a verso or Atlas territory to keep your stock rear case. You could always put a first gen chain drive case in too...they are pretty cheap from yards.
     
    Snowy, Mar 17, 2019
    #744
    ToyRyd04, malburg114 and ovrlndkull[QUOTED] like this.
  5. Mar 17, 2019 at 5:37 PM
    #745
    ovrlndkull

    #745
    ovrlndkull STUKASFK - HC4LIFE

    Joined:
    Jan 7, 2017
    Member:
    #206806
    Messages:
    37,785
    Gender:
    Male
    First Name:
    Skip
    Burlington, NC
    Vehicle:
    2005 DCLB Silver
    63s, XD Machete, Beat not Babied
    Putting a gear driven case in wouldn't hurt my feelings either. I would like the ability to clock it some.
     
    ovrlndkull, Mar 17, 2019
    #745
  6. Mar 17, 2019 at 6:21 PM
    #746
    ToyRyd04

    #746
    ToyRyd04 Taco Transformer

    Joined:
    Aug 5, 2011
    Member:
    #61217
    Messages:
    1,862
    Gender:
    Male
    First Name:
    Greg
    Perryville, MD
    Vehicle:
    '04 PreRunner
    SAS'd PreRunner Diamond Axles Crawlbox
    x2 I doubt the 2nd gen case is substantially stronger then the 1st gen tacoma chain drive. Just a slightly different bolt mounting pattern. Plus most guys with crawl boxes do away with the electronic 4x4 and go manual anyway which is what the 1st gen t cases mostly are.
     
    ToyRyd04, Mar 17, 2019
    #746
    G.T. likes this.
  7. Mar 17, 2019 at 7:01 PM
    #747
    ovrlndkull

    #747
    ovrlndkull STUKASFK - HC4LIFE

    Joined:
    Jan 7, 2017
    Member:
    #206806
    Messages:
    37,785
    Gender:
    Male
    First Name:
    Skip
    Burlington, NC
    Vehicle:
    2005 DCLB Silver
    63s, XD Machete, Beat not Babied
    I'll research more into the 1st gen case situation. But getting an old gear drive case doesn't seem too hard either.
     
    ovrlndkull, Mar 17, 2019
    #747
  8. Mar 17, 2019 at 7:10 PM
    #748
    Snowy

    #748
    Snowy Is neither here nor there

    Joined:
    Feb 5, 2014
    Member:
    #122349
    Messages:
    3,455
    Gender:
    Male
    First Name:
    Connor
    Winnebago, IL
    Vehicle:
    3 linked 98 Xtra cab
    Stock-ish
    Older gear drive cases are passenger drop. You need a driver drop case on IFS
     
    Snowy, Mar 17, 2019
    #748
    hoverlover and ovrlndkull[QUOTED] like this.
  9. Mar 17, 2019 at 7:11 PM
    #749
    HomerTaco

    #749
    HomerTaco [OP] also HomerTaco Vendor

    Joined:
    Mar 28, 2010
    Member:
    #34129
    Messages:
    45,875
    Gender:
    Male
    First Name:
    HomerTaco
    HomerTaco
    Vehicle:
    HomerTaco
    HomerTaco ...................................................................................................................................................... Core-Hurst short throw shifter & T-handle / Carbon Fiber Interior / custom console light / De-badged / leather interior / Heated Front seats / Red Line Hood Struts / Painted speaker grills /one-off TRD Satoshi Grill with 12-15 front-end swap/ Pioneer AVIC-X920BT HU / Scangauge II / Black LED Tails / Dash Mount for iPad mini / Safari Snorkel / Auto-pilot mode / Leer 100XQ Cap / 4x Innovations sliders / Rear Diff Breather Mod / front windows tinted to 35% / Brute Force Fab Hybrid Front Bumper / BAMF Rear Diff Skid / Budbuilt Skids / CBI Trail Master 2.0 rear hybrid bumper / Fox rr coils/ TC UCA's/ TC spindle gussets/ TC Cam Tab gussets / Dakar leafs / Defined Engineering shackles / All pro U bolt flip / Timbren Rear Bumpstops / BAMF LCA skids / Exhaust re-route / Fog Light anytime Mod / LowRange Off Road extended rear brake lines / ATO Shackle Flip / sectioned Bushwhacker flares / re-geared to 4.56 / ARB Front & Rear Locking Diff / ARB CKMA12 compressor / PrInSu full rack system / 1" body lift / Inchworm 4.7 crawlbox / twin stick FJ t-case / Davez off-road triple-stick kit/
    Troof
     
    HomerTaco, Mar 17, 2019
    #749
    ovrlndkull likes this.
  10. Mar 17, 2019 at 7:12 PM
    #750
    ovrlndkull

    #750
    ovrlndkull STUKASFK - HC4LIFE

    Joined:
    Jan 7, 2017
    Member:
    #206806
    Messages:
    37,785
    Gender:
    Male
    First Name:
    Skip
    Burlington, NC
    Vehicle:
    2005 DCLB Silver
    63s, XD Machete, Beat not Babied
    Gotcha :thumbsup:. So I need to figure out if the 1st gen case will hold up to the 4.0l then it would be on!!!! Less $$$$ and wait over a MC set up
     
    ovrlndkull, Mar 17, 2019
    #750
  11. Mar 17, 2019 at 7:20 PM
    #751
    ovrlndkull

    #751
    ovrlndkull STUKASFK - HC4LIFE

    Joined:
    Jan 7, 2017
    Member:
    #206806
    Messages:
    37,785
    Gender:
    Male
    First Name:
    Skip
    Burlington, NC
    Vehicle:
    2005 DCLB Silver
    63s, XD Machete, Beat not Babied
    Just went looking for the Verso apparently it's Kaputz too.
     
    ovrlndkull, Mar 17, 2019
    #751
  12. Mar 17, 2019 at 7:55 PM
    #752
    Snowy

    #752
    Snowy Is neither here nor there

    Joined:
    Feb 5, 2014
    Member:
    #122349
    Messages:
    3,455
    Gender:
    Male
    First Name:
    Connor
    Winnebago, IL
    Vehicle:
    3 linked 98 Xtra cab
    Stock-ish
    It’s the same vf2a/b transfer case with a different pattern on the front to mate to the 750f trans
     
    Last edited: Mar 17, 2019
    Snowy, Mar 17, 2019
    #752
    ovrlndkull[QUOTED] likes this.
  13. Mar 17, 2019 at 8:02 PM
    #753
    ovrlndkull

    #753
    ovrlndkull STUKASFK - HC4LIFE

    Joined:
    Jan 7, 2017
    Member:
    #206806
    Messages:
    37,785
    Gender:
    Male
    First Name:
    Skip
    Burlington, NC
    Vehicle:
    2005 DCLB Silver
    63s, XD Machete, Beat not Babied
    Nice!
     
    ovrlndkull, Mar 17, 2019
    #753
  14. Mar 18, 2019 at 4:16 AM
    #754
    SGTCap

    #754
    SGTCap Well-Known Member

    Joined:
    Oct 30, 2013
    Member:
    #115529
    Messages:
    3,834
    Gender:
    Male
    First Name:
    Cap
    Summerville, SC
    Vehicle:
    4x4 6-spd,
    37s, 4x4 6-spd, OME 886s, Allpro Expos, SOS sliders and front/rear bumpers,Rack,Skids, 4.56s, Lockers,Recon Winch, TJM RTT, Lots of tools, boxes and gear. Shaggy mutt behind the seat
    Good tip, but damn I hope that isn't it, lol. Although it doesn't sound unlikely. How did you diagnose that this was the problem? What adapter were you using? Mine's an Inchworm and I have it clocked at 15degrees.
     
    SGTCap, Mar 18, 2019
    #754
  15. Mar 18, 2019 at 8:49 AM
    #755
    Snowy

    #755
    Snowy Is neither here nor there

    Joined:
    Feb 5, 2014
    Member:
    #122349
    Messages:
    3,455
    Gender:
    Male
    First Name:
    Connor
    Winnebago, IL
    Vehicle:
    3 linked 98 Xtra cab
    Stock-ish
    Getting to the top of the tcase would be the best way to figure it out but probably not the easiest if you didn’t cut your floor. Then you can work the shifter base without the linkage and make sure the ball of the shifter is in the shift rail, and see if the rail is moving correctly. Otherwise you can play with the linkage length to see if that fixes it. No easy way otherwise.
     
    Snowy, Mar 18, 2019
    #755
  16. Mar 18, 2019 at 10:44 AM
    #756
    wrmathis

    #756
    wrmathis Dark Lord of the Sith

    Joined:
    Sep 10, 2008
    Member:
    #9126
    Messages:
    9,428
    Gender:
    Male
    First Name:
    Ryan
    Bonaire, GA
    Vehicle:
    2006 Tacoma TRD OR 4x4
    parts and stuff
    I have an inchworm. And it was a guess that was the problem. The shifter wouldn’t budge at all and that’s the only reason why. Once i loosened the bolts and rotated it slightly I was able to shift it in low
     
    wrmathis, Mar 18, 2019
    #756
  17. Mar 18, 2019 at 11:20 AM
    #757
    SGTCap

    #757
    SGTCap Well-Known Member

    Joined:
    Oct 30, 2013
    Member:
    #115529
    Messages:
    3,834
    Gender:
    Male
    First Name:
    Cap
    Summerville, SC
    Vehicle:
    4x4 6-spd,
    37s, 4x4 6-spd, OME 886s, Allpro Expos, SOS sliders and front/rear bumpers,Rack,Skids, 4.56s, Lockers,Recon Winch, TJM RTT, Lots of tools, boxes and gear. Shaggy mutt behind the seat
    I'm definitely thinking about cutting another hole in the floor and just patching it when I'm done adjusting linkage, and getting this thing to work.
     
    SGTCap, Mar 18, 2019
    #757
  18. Mar 18, 2019 at 8:54 PM
    #758
    6 gearT444E

    #758
    6 gearT444E Certified Electron Pusher

    Joined:
    Feb 3, 2018
    Member:
    #243372
    Messages:
    7,773
    Deep South
    Herculiner Hootus
    man with all these crawlbox shortages I'm wondering how much coin I could get for a merlin setup if I part mine out LOL
     
    6 gearT444E, Mar 18, 2019
    #758
    hoverlover, HomerTaco[OP] and TacoFMS like this.
  19. Mar 19, 2019 at 7:33 AM
    #759
    ToyRyd04

    #759
    ToyRyd04 Taco Transformer

    Joined:
    Aug 5, 2011
    Member:
    #61217
    Messages:
    1,862
    Gender:
    Male
    First Name:
    Greg
    Perryville, MD
    Vehicle:
    '04 PreRunner
    SAS'd PreRunner Diamond Axles Crawlbox
    ToyRyd04, Mar 19, 2019
    #759
    Jiveydude likes this.
  20. Mar 24, 2019 at 2:27 PM
    #760
    Jonyd182

    #760
    Jonyd182 What do you mean I can't go up there...Watch this!

    Joined:
    Aug 9, 2011
    Member:
    #61443
    Messages:
    684
    Gender:
    Male
    First Name:
    Jonathan
    Columbia, SC
    Vehicle:
    '99 SR5 TRD 3.4
    Armored to the teeth, 35's, Crawlbox, Boxed Frame
    That's what I did. Without a body lift and the triple sticks there is just no room for the linkage. I spoke with RADesign a couple of times through the install and he said a lot of people cut 2 one inch channels into the floor to make room for the linkage back to the stock t-case.

    He mentioned that a couple of people said they were able to create enough clearance by using a Thor hammer from below but he thought that was highly unlikely without a body lift.
     
    Jonyd182, Mar 24, 2019
    #760
    malburg114 likes this.
Page 38 of 175
To Top