Everything MOLLE BS

Sorry but no. I made a thread to gauge interest and it wasn’t a great response, nor could I get anyone interested locally to me so I could take measurements.

 

Just waiting on the sound deadening stuff. I’ll get more bags as I need them. This is what I’ve done so far. I would like to add a fire extinguisher to the drivers side near the first aid kit. Any ideas on mounts for it? I don’t mind riveting one to the metal for a more permanent mount if it lines up correctly.

 

Keep your fire extinguisher to the outer sides so if you have to reach for it, you don’t have to reach over other items. Vertical or horizontal is personal preference and depending on the mounting bracket.

 

That is the plan. I will typically ride with the drivers side seat down, so I plan on doing it that way. Readily available. I’d rather do it once so if anybody can recommend a decent fire extinguisher mount for a 2-3lb bottle I’d appreciate it.

 

This is what I used for the bed of my truck.

$17 Kidde 420118 Mounting Bracket for Mariner Dry Chemical Fire Extinguishers 2.5 lb thru 2.75 lb M5, M10, M110

https://www.amazon.com/dp/B00002NC0N/ref=cm_sw_r_cp_api_i_itSKCbMNVY8BA

 

I got it all deburred and installed tonight. I used some engine bay dress up hardware I had laying around. It worked out prerfect. I might still paint it later on. I was thinking spray can bed liner. I used it to black out my rear bumper and it worked really well .

 

Did you deburr with a Dremel?

 

Ya. Kind of a pain but definitely worth the time.

 

In for gb15

 

Is this still open?

 

Taking names for 15.

 

sending you a PM

 

Can you post a link or pic of the dremel tip you used to debur?

 

How much of sound difference do you have now? Before & after?

 

Whats the interior of the first aid kit look like? Presume its also quick deployable as well? Might as well toss up a link if ya got one! I am hunting down my molle pouches and need one for dog poop bags (rolls), leashes, dog toys. Really wish I had stores around me that had them in stock so I could see the products.

Thanks

Steve

 

All of the bags that I’ve bought have been “condor” brand. The quality is pretty decent for my application because they won’t wont be heavily used everyday. The prices are pretty decent too. In fact, I bought a condor bag to use on dual sport motorcycle as a tail bag. It’s not waterproof, but it has held up quite well. The first aid kit that I purchased does not come with the patch that you see in my other photo, that was purchased separately. If you search “condor Molle” on Amazon, you’ll find what’s available. I’m not sure what kind of dog bags you’re using, but they make a water bottle holster that may work for that.

CONDOR Rip-Away EMT Pouch Red

$31 Condor Rip-Away EMT Pouch Red,8" H x 6" W x 3.5" D

https://www.amazon.com/dp/B00AEM35U6?ref=ppx_pop_mob_ap_share

Here is the inside of the first aid kit as requested. It is the tear away type and the Velcro is very strong.

 

I don’t have any quantitative data. But I can tell you that I didn’t soundproof my doors when I initially did the roof and floor of the cab. When I put everything together and started driving around. It felt as if my Right ear was clogged like I had water in it. Figured out there was that much of a difference to me anyways between the sound from the cab vs my door. Had to roll down the window on the passenger side window a bit for a few days while I drove until I had time to soundproof my doors.

 

+1 for Condor bags. Good product at a decent price. You can fill up your panel with usable bags/storage without breaking your wallet

 

oh they have some great bags, pretty sure the utility pouch, gas mask/bino pouch will be what i need for the dog. then I can bungee my other kit and add from there.

 

I just used one of the smaller stone ones.