What Have You Done To Your 2nd Gen Tacoma Today?

What grill are you running on your truck?

 

Nice!! ....great.....something else to spend money on....this place is good for that lol.

 

I’m still putting together the part list since they add up. But in the long run it’ll save me a decent amount of money if I do it and not someone else.

 

That's the TRD pro grill

 

Had some Chinese made crap fit with some other Chinese made crap & picking up some lumber

 

Got my new BD S2 Sports mounted. I got the work/scene lenses to use for supplemental reverse lights. I used a factory hole and hardware in the rear bumper. I don't rock crawl so they should be sufficiently out of the way.

Waiting on a couple more parts to finish wiring them. Connecting them to a switch in the lower cluster below the ac controls as I don't want/need them every time I shift into reverse.

I'll post some night pics once the wiring is complete.

Really digging these lights though. Anyone use these as low-pro Ditch Lights with a different beam pattern?

 

Prinsu TopRack went on yesterday!





Oh and the little RIGID Scene light pods onto the side rails of the rack. Not wired in yet. CabRack going on today

 

Did this today to deter bed mat theft. Recommended by a TW member.

 

I installed this little gem today. It's a small LED light console that mounts underneath the radio console.

I found out about these from one of the YouTube videos made by @boogie3478 aka Tacomaholic. This is not the same one he installed but it better suits my needs. I am trying to better illuminate the switches in my Iggy panel just ahead of the console.

Installation was real easy. You just pop off the HVAC knob panel, and the device's wires tap off a couple of wires going into the black connector. The steel mounting plate is held onto the bottom of the radio console with Peel and Stick adhesive and the device holds on to that by magnets. What's cool is you can pull it right off the mounting plate and use it as an emergency flashlight. (In addition to the 12V power it also has a couple of coin batteries included.)

I'll give it a real test tonight after dark.

http://www.flyzeye-designs.com/main.html

 

Foam cannon doing its thing!

 

Pop n Lock locking tailgate handle and rear diff breather mod today.

 

Got a little further on the bumper today just about done and should be coating this bad boy this next week.

 

What kind of bumper is that?

 

https://www.coastaloffroad.com/product-page/2nd-gen-tacoma-high-clearance-plate-bumper

 

It’s real nice, like how nice and snug it is to the body.

 

Thanks it’s been a fun project!

 

I did a thing and got 285s put on after my alignment. No rubbing! Now I gotta sell my 265s before the wife sees. lol



If anyone's wondering,

Here are my alignment specs from today.

 

Installed a BPF Tow hook bracket, and BPF skid plate.

 

Put my LED headlights where they belong. I had to swap out the headlight assembly due to me being a dumbass and super gluing them in after breaking the metal tab thing that holds the bulb in. Got them for 10 bucks so not bad. Retrofits should be done next week, and I'll probably be building up this pair to sell. As well as my other pair if I can get the lenses clear.

 

Put my Michelin wiper blades from Costco on finally. Wooo so exciting I know