What Have You Done To Your 3rd Gen Today?

Almost got rack fully equipped.

 

Is that a NNSY parking pass on your mirror.

 

Exhaust is next. Any suggestions? I want a good sound. Im user to 2018 camaro ss lt1 v8 sound lol...

 

Nah, its a one from Virginia Tech.

 

Great stuff. I have had no issues after a couple of years use of hood and tool box lights. Lights are awesome.

 

One word GIBSON

 

Seam sealed the pinch weld. The canister broke in my caulking gun so I had to use a putty knife to put it on. After 9 hours the stuff is pretty solid. Tomorrow I'll paint it black.

 

Got the hi lift mounted to the prinsu. I'll have to get a better shot here in a minute

 

Welcome to TW!

 

OEM bed cover. Centers the cover to line up the pass side bolt and drive side hitch.

 

I've had it for a decade (carry over from my 2009 Tundra)

 

That is shitty, Neighbour...good luck with Toyota Canada.

I am still a bit away from my first (6000 km) service, but given your experience (and others here) I am gonna start in on the service folks on my first visit

Keep us all posted

 

Installed CaliRaised sliders today. (25 degree w/kickout) Not a difficult job but definitely took me longer than I expected. The bars and hardware are beefy.

 

Suggestion on making a version 3.5 upgrade: spring loads for the coin slots

 

Added a ski rack to the home-made bed rack that I installed yesterday. Going to be putting a 48"x24" hitch mounted basket on the other side.

 

Cooper S/T MAXX 255/85r16 and sold the stock tires to recoup a little of the cost

 

Finally got mine washed!

 

I got real lucky to find this one. 2nd owner, no rust, and unmolested. It’s my third fox, but I’m building this one to keep forever. ‘93 GT, 331 stroker, full Maximum Motorsport coilover suspension with panhard bar, K-member and caster/camber plates, ‘95 4 wheel disc/5lug Cobra brake system, 3.73 gears, 6 speed Magnum transmission. Full wire tuck, and the list is never ending.

Here’s how it sits at the moment. Waiting for the original block to come back from the machine shop so I can continue on.