Bent Front Frame, need help to ID parts

Took the Tacoma off a drop bigger than expected and she took a good hit. Anyways I removed the mangled skip plate and saw that my frame and some other components took some damage. Below are some photos and I was wondering what parts these are so i can order replacements.

 

Ouch! Good time for a full set of steel skids

 

Good hit! Looks like the skid plate and supports did their jobs.

Those both go when you add an aftermarket skid plate, so I'd replace the bent part and your skid with an aftermarket one. I replaced mine with ones from SOS Offroad Concepts, they've taken a couple of good hard hits (and have a good dent from one) but have held up great.

 

The first picture is what I want to replace. The frame hasn't caused any issues in ride or performance but was also wondering if its worth bending back or not. Lastly the bushing is pinched and was wondering if its worth worrying about.

 

Damn! Got any video of the incident?

 

Your frame is not bent. Components that bolt to the frame are bent. Get aftermarket skid and call it a day.

 

Meh,if you're guna replace the bushing, might as well wait till it grenades. Just buy one and hold onto it till the old one goes.

 

I wanna see what you hit.

 

By any chance OP, was this you?

 

Looks like you have a good amount of rust starting up.

 

Any idea what that bushing is called?

 

The front cross member (2nd picture) is bent slightly upwards. I'm probably just gonna leave it be

 

Took it off a 10 ft drop going 30mph (horizontally airborne 20ft) down a good hill with 2ft of snow and covered in basketball size + rocks. Got out and kicked out the snow from the tires and drove her down the rest of the mountain! Truck is a beast but it stresses me out thinking about it haha

 

I'm trying to picture this correctly.
You drove off a 10ft high cliff at 30mph, then nose dived into rocks and some snow.

Why?

 

Because his mother is his sister.

 

He was texting?

 

Icy Road..... Took it off a steep hill going sideways. Looks like those bent pieces get tossed with an after market skid plate, might have to bolt some steel flat bar to the frame to shim it for mounting the new skid.

 

And you didn’t get it on video?!?

Edit- just saw post 17

 

Should have been using your RAV...it would have taken the hit no problem...lots of plastic and airbag dust LOL