What have you done to your Tacoma today? 1st Gen Edition

Thanks! Definitely seems like a good amount of work. I want to verify that that is where the leak is coming from before tearing everything down. Does it normally fill the whole valley with coolant? The front of the valley is dry on mine. It also seems like it would leak down the passenger side of the engine as well, which mine isn't doing. Just the drivers.

 

the ones ive seen differ on where the leak. some passenger side some driver side. just depends on where the "gasket" on the plate is more open i guess (its not a gasket but kind of? its foam i think)
but judging by your pics id say is safe to say is that coolant plate. ive never seen a head gasket leak that bad. The front of the valley is taller so it'll fill till it leaks out the back.

 

The girl got new shoes

265/75r16 BFG KO2 & Custom powdercoated MotoMetal Wheels.

 

Yes, the website "says" 2 weeks. Took over 4 weeks to get confirmation of shipping and tracking info and another 2 weeks to get to me in OR, for 6 weeks total.

 

Will it hurt anything to drive it like this for a little while until I can get this fixed? As long as I keep an eye on the coolant and add as needed?

 

ive never seen people who ignore it have issues. but im sure it potentially can cause issues with the knock sensors eventaully

 

Re-packed my XRC8 with new grease. And checked to make sure the winch fits properly in my half way done bumper. Now to move on and make some wings on this thing.

 

Clean fucking work dude! This is the route I wanted to go until I went full nerd and started exploring a wifi solution that I've been toying with for a while.

 

Yikes!

Thanks for the feedback man.

 

where did you get that patch? looks like my truck

 

https://lower48outfitters.com/product/king-of-tacos/

 

dang, they are sold out.

 

Moved to: https://www.tacomaworld.com/threads/transmission-slipping-or-something-else.601296/

Any input would be appreciated.

 

Finished putting the interior back together. Got the roof and rear sound deadened, rear speakers and sub installed.

Next week hafta do the doors and wire in the amp.

Also found a possible leak in the front diff.

So much to do and never enough time...

 

Check that your fill/drain plugs are tight on the diff, otherwise it's probably coming from one of the axle seals

 

You don't have a solid front axle though... Or MaxTrax or a bed rack or ...

 

What keeps out trucks from starting? I'm stuck on the side of the highway currently about to call for the tow truck. It cranks and wants to fire but it seems like something is killing it.

 

Dont forget, im also not parked on an embroidered Taco.

 

igniter, the ECU recieving power, the circuit opening relay, fuel pump relay... all the lights on the dash coming on?

Did the turbo melt something wiring related, the igniter and MAF wires cross near it

Obviously check your fuses, if ones blown that's a great hint at where your problem is

 

Dash lights are all on. Not seeing anything melted. Not really in a good spot to look at to much. Not much of a shoulder here.