Ome 888

So I can use ome 888 coils on Bilsteins 5100

 

Yes as long as the clip/perch is set to zero. Do not preload them

 

How many inches of lift you think I would get out of it realistically

 

Right around 2.5 to 3 inches. Are you going with aftermarket control arms?

 

Probably not right away but eventually I might . You think I should ?

 

It will help get a proper alignment on the truck. Without them you have to max out the cams to get it somewhere near acceptable.

 

What’s a good brand you would recommend that’s not overly expensive

 

I think spc or jba is what everyone is running.

 

yes you can this is the kit I'm running but I had to get different UCAs and ended up with Cambergs the ones in the pic did no fit right.
if you run 888 and 5100s the stock UCAs will rub the coils. Ask me how I know!

 

Okay thanks man !

 

I had to use a 1/2 in spacer to get a full 3 in lift.

 

I have JBA UCAs. They're awesome and they look sick.

 

As @JaCado said, SPC are nice because you can adjust the caster and the ball joints are easy to replace. I’ve run mine at 75mph over some gnarly terrain and they have held up nicely. Ball joints are like $85