1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: TPMS Riddle? Jba or camburg ucas opions? Idea's for the Tacoma Which differential grease? Does anyone have a high output air compressor installed? Leveling kit experience vs lift

2nd Gen DIY Big Brake KIt -OEM parts- Part #'s provided (INSTALLED)

Discussion in '2nd Gen. Tacomas (2005-2015)' started by craigFLA, Jul 31, 2016.

Page 14 of 25
  1. Mar 28, 2019 at 2:28 PM
    #261
    1E7DCSB

    #261
    1E7DCSB Well-Known Member

    Joined:
    Jan 22, 2018
    Member:
    #242056
    Messages:
    308
    Gender:
    Male
    NH
    Depends what calipers you are using. I used
    47314-35320
    47316-35280
    They’re the ones that go with the WH calipers I used.
     
    1E7DCSB, Mar 28, 2019
    #261
    garciav[QUOTED] likes this.
  2. Mar 28, 2019 at 2:29 PM
    #262
    garciav

    #262
    garciav Well-Known Member

    Joined:
    Apr 11, 2016
    Member:
    #184036
    Messages:
    582
    Gender:
    Male
    Houston, TX
    Vehicle:
    2013 Tacoma TRD Off-Road 6MT
    TRD SC,HPTuners
    good catch, i did pull up the lines for a tacoma

    Does anyone know if its possible to use the tacoma lines or you have to switch over to the 4 runner lines ?
     
    garciav, Mar 28, 2019
    #262
  3. Mar 28, 2019 at 2:31 PM
    #263
    garciav

    #263
    garciav Well-Known Member

    Joined:
    Apr 11, 2016
    Member:
    #184036
    Messages:
    582
    Gender:
    Male
    Houston, TX
    Vehicle:
    2013 Tacoma TRD Off-Road 6MT
    TRD SC,HPTuners
    can anyone confirm which lines go with the WA calipers ?
     
    garciav, Mar 28, 2019
    #263
  4. Mar 28, 2019 at 2:31 PM
    #264
    mr.trd

    #264
    mr.trd Are you Recreationally Insane?

    Joined:
    Jul 9, 2008
    Member:
    #7842
    Messages:
    1,447
    Gender:
    Male
    First Name:
    Brant
    Pocatello, Idaho
    Vehicle:
    '06 S/C 1GR-FE DCSB
    Icon coilovers w 14" 700lb springs, Icon billet UCA w/ Delta joints, custom built Icon rear resi-shocks, Icon stage 3 rear leaf pack, Archive Garage Hammer Hangers w/ homemade spreader bar, superbumps up front and timbren bumps in the rear, Crown brake lines, U-bolt flip,4.88's with front ARB locker and ARB dual compressor mounted behind back seat, 285/75R17 BFG A/T KO2's on Bronze Icon Alloy Compression's, 5th gen T4R budget big brake kit, CBI Off-Road Fab. custom Trailmaster 2.0 with swing-away tire carrier, CBI custom tube front bumper, CBI kickout sliders, CBI full flat belly skids including gas tank,CBI Ditch Light brackets w/ Heretic Studio Quattro's, Heretic Studio's 30" Amber on the front, Heretic Studio 40" bar under the Front Runner Roof Rack, Expedition Essentials RAM mount, Leer used shell, OEM black chrome sport headlights, fog lights always on mod, rear locker anytime mod, TRD supercharger, URD Ucon-EMS, Deatschwerks 255 fuel pump w/ URD external fuel filter kit, AFE intake paired to a Safari Snorkel, URD spec-U exhaust w/ factory Tundra muffler behind URD equal length headers.
    Also I think I have decided to go with factory blank rotors instead of DBA 4x4 Survival rotors. Mainly for cost reasons at this point. But not for sure. Really want the dba's but they are alot of money and shipping isn't cheap. Factory Toyota parts come to me everyday freight free.
     
    mr.trd, Mar 28, 2019
    #264
  5. Mar 28, 2019 at 2:31 PM
    #265
    1E7DCSB

    #265
    1E7DCSB Well-Known Member

    Joined:
    Jan 22, 2018
    Member:
    #242056
    Messages:
    308
    Gender:
    Male
    NH
    You can make them work with a bit of bending. I didn’t feel like doing that so I just ordered the correct ones for the calipers I used, they’re cheap.
     
    1E7DCSB, Mar 28, 2019
    #265
  6. Mar 28, 2019 at 2:32 PM
    #266
    1E7DCSB

    #266
    1E7DCSB Well-Known Member

    Joined:
    Jan 22, 2018
    Member:
    #242056
    Messages:
    308
    Gender:
    Male
    NH
    I can check Monday when I’m back to work. I did WH, and that’s the part numbers for the WH.
     
    1E7DCSB, Mar 28, 2019
    #266
    garciav[QUOTED] likes this.
  7. Mar 28, 2019 at 2:33 PM
    #267
    garciav

    #267
    garciav Well-Known Member

    Joined:
    Apr 11, 2016
    Member:
    #184036
    Messages:
    582
    Gender:
    Male
    Houston, TX
    Vehicle:
    2013 Tacoma TRD Off-Road 6MT
    TRD SC,HPTuners
    that would be great if you don't mind !
     
    garciav, Mar 28, 2019
    #267
    1E7DCSB[QUOTED] likes this.
  8. Mar 28, 2019 at 2:39 PM
    #268
    1E7DCSB

    #268
    1E7DCSB Well-Known Member

    Joined:
    Jan 22, 2018
    Member:
    #242056
    Messages:
    308
    Gender:
    Male
    NH
    Don’t mind at all, I’ll update Monday unless someone beats me to it. I’m just gonna use my buddy’s 16 t4r trail vin to get the part numbers since he bought it from my dealership
     
    1E7DCSB, Mar 28, 2019
    #268
  9. Mar 28, 2019 at 2:44 PM
    #269
    garciav

    #269
    garciav Well-Known Member

    Joined:
    Apr 11, 2016
    Member:
    #184036
    Messages:
    582
    Gender:
    Male
    Houston, TX
    Vehicle:
    2013 Tacoma TRD Off-Road 6MT
    TRD SC,HPTuners
    Can you check a 2010-2015 T4R ? looks like the caliper changed from 14WA to 14WB based on this post below ?

     
    garciav, Mar 28, 2019
    #269
  10. Mar 28, 2019 at 2:51 PM
    #270
    1E7DCSB

    #270
    1E7DCSB Well-Known Member

    Joined:
    Jan 22, 2018
    Member:
    #242056
    Messages:
    308
    Gender:
    Male
    NH
    Yep I can do that. Didn’t know they swapped them out, good to know!
     
    1E7DCSB, Mar 28, 2019
    #270
  11. Mar 28, 2019 at 3:18 PM
    #271
    mr.trd

    #271
    mr.trd Are you Recreationally Insane?

    Joined:
    Jul 9, 2008
    Member:
    #7842
    Messages:
    1,447
    Gender:
    Male
    First Name:
    Brant
    Pocatello, Idaho
    Vehicle:
    '06 S/C 1GR-FE DCSB
    Icon coilovers w 14" 700lb springs, Icon billet UCA w/ Delta joints, custom built Icon rear resi-shocks, Icon stage 3 rear leaf pack, Archive Garage Hammer Hangers w/ homemade spreader bar, superbumps up front and timbren bumps in the rear, Crown brake lines, U-bolt flip,4.88's with front ARB locker and ARB dual compressor mounted behind back seat, 285/75R17 BFG A/T KO2's on Bronze Icon Alloy Compression's, 5th gen T4R budget big brake kit, CBI Off-Road Fab. custom Trailmaster 2.0 with swing-away tire carrier, CBI custom tube front bumper, CBI kickout sliders, CBI full flat belly skids including gas tank,CBI Ditch Light brackets w/ Heretic Studio Quattro's, Heretic Studio's 30" Amber on the front, Heretic Studio 40" bar under the Front Runner Roof Rack, Expedition Essentials RAM mount, Leer used shell, OEM black chrome sport headlights, fog lights always on mod, rear locker anytime mod, TRD supercharger, URD Ucon-EMS, Deatschwerks 255 fuel pump w/ URD external fuel filter kit, AFE intake paired to a Safari Snorkel, URD spec-U exhaust w/ factory Tundra muffler behind URD equal length headers.

    They are 47314-60311 and 47317-60131 for the 14WA. I can't find the physical difference in the rotors that use the 14WA and the 14WB. And NAPA doesn't have a Eclipse reman for the 14WB so I am doing the 14WA.
     
    mr.trd, Mar 28, 2019
    #271
    1E7DCSB likes this.
  12. Mar 28, 2019 at 9:23 PM
    #272
    raco.the.taco

    #272
    raco.the.taco Well-Known Member

    Joined:
    May 11, 2016
    Member:
    #186720
    Messages:
    462
    Gender:
    Male
    First Name:
    Chad
    Denver, CO
    Vehicle:
    Locked, Geared & 1/2 Long Traveled
    Pelfreybilt Front Bumper, All-Pro Rear Bumper & Sliders, 35's, Toytect Boss Coilovers, JBA UCA's, DTF SUA Kit w/ E30 Deavers, Wheelers superbumps, Front & Rear Locked, 4.56 Gears
    Just did this swap. I didn’t swap out the dust shield. Had to find a section that was rubbing and bend it out but other than that, this upgrade made a huge difference for me. I also went with the EBC pads.
     
    raco.the.taco, Mar 28, 2019
    #272
    garciav likes this.
  13. Mar 29, 2019 at 5:28 AM
    #273
    mbrogz3000

    #273
    mbrogz3000 Well-Known Member

    Joined:
    Oct 11, 2011
    Member:
    #65009
    Messages:
    1,086
    Gender:
    Male
    First Name:
    Matt
    Northern NJ
    Vehicle:
    2020 Toyota 4Runner Limited
    Prestone Dot 4 is actually very good. Only $4 a bottle from Walmart.
     
    mbrogz3000, Mar 29, 2019
    #273
  14. Mar 29, 2019 at 8:15 AM
    #274
    garciav

    #274
    garciav Well-Known Member

    Joined:
    Apr 11, 2016
    Member:
    #184036
    Messages:
    582
    Gender:
    Male
    Houston, TX
    Vehicle:
    2013 Tacoma TRD Off-Road 6MT
    TRD SC,HPTuners
    Do I need to purchase a shim kit separately from the brake pads ? I am going with the EBC greenstuff's as well.
     
    garciav, Mar 29, 2019
    #274
  15. Mar 29, 2019 at 11:57 AM
    #275
    4x4Taco09

    #275
    4x4Taco09 Well-Known Member

    Joined:
    Sep 17, 2011
    Member:
    #63687
    Messages:
    2,438
    Gender:
    Male
    First Name:
    Dane
    Louisiana
    Vehicle:
    09 TRD Sport 4x4 BSP DC LB
    Kings, Deavers, Brute Force, Prinsu, Lights, all the stuff
    No, they come with shims.

    Why are people replacing the hardlines? you don't need to. I just swapped for SS lines at the same time, actually my drivers side hardline was all jacked up after finally removing the rubber line, I ran to Napa and bought a straight 6" line and bent it into an S shape real fast, works great
     
    4x4Taco09, Mar 29, 2019
    #275
    Koolbreeze7 and raco.the.taco like this.
  16. Mar 30, 2019 at 3:19 PM
    #276
    1E7DCSB

    #276
    1E7DCSB Well-Known Member

    Joined:
    Jan 22, 2018
    Member:
    #242056
    Messages:
    308
    Gender:
    Male
    NH
    I’m in the north east, mine didn’t look too great. I was already replacing everything else and I had them in stock. After what I was spending on the swap, adding those two lines was nothing lol
     
    1E7DCSB, Mar 30, 2019
    #276
    TRDSport10, 4x4Taco09[QUOTED] and mr.trd like this.
  17. Mar 30, 2019 at 3:52 PM
    #277
    05Taco4x4

    #277
    05Taco4x4 ToyotaHubs

    Joined:
    Jun 29, 2011
    Member:
    #59085
    Messages:
    6,240
    Gender:
    Male
    Vehicle:
    2TR-FE Enthusiast
    FJ Tcase, Manual Hubs, 2017 Head unit, Mirror Riser
    The stock hard lines need bending to work?

    edit:
    nevermind
     
    05Taco4x4, Mar 30, 2019
    #277
  18. Apr 16, 2019 at 8:20 AM
    #278
    garciav

    #278
    garciav Well-Known Member

    Joined:
    Apr 11, 2016
    Member:
    #184036
    Messages:
    582
    Gender:
    Male
    Houston, TX
    Vehicle:
    2013 Tacoma TRD Off-Road 6MT
    TRD SC,HPTuners
    I just knocked this out this past weekend, went with the EBC pads, and did SS lines on all 4 corners. After driving ~100 miles there is definitely a noticeable difference in stopping power.

    However, on hard stops, my truck pulls slightly to the driver's side. Anyone know what could be causing this ?
     
    garciav, Apr 16, 2019
    #278
    4x4Taco09 and pinchetaco like this.
  19. Apr 16, 2019 at 11:38 AM
    #279
    4x4Taco09

    #279
    4x4Taco09 Well-Known Member

    Joined:
    Sep 17, 2011
    Member:
    #63687
    Messages:
    2,438
    Gender:
    Male
    First Name:
    Dane
    Louisiana
    Vehicle:
    09 TRD Sport 4x4 BSP DC LB
    Kings, Deavers, Brute Force, Prinsu, Lights, all the stuff
    Possibly a piston sticking? Did you buy reman calipers?
     
    4x4Taco09, Apr 16, 2019
    #279
  20. Apr 16, 2019 at 11:59 AM
    #280
    garciav

    #280
    garciav Well-Known Member

    Joined:
    Apr 11, 2016
    Member:
    #184036
    Messages:
    582
    Gender:
    Male
    Houston, TX
    Vehicle:
    2013 Tacoma TRD Off-Road 6MT
    TRD SC,HPTuners
    Yeah I got the reman calipers from napa. How would I know if a piston is sticking ?
     
    garciav, Apr 16, 2019
    #280
Page 14 of 25

Products Discussed in

A-Premium Disc Brake Caliper Assembly Compatible with Toyota and Lexus Models - 4Runner 2014-2023, GX460 2014-2023 - Front Left Driver Side
$90.99
Genuine Toyota Fluid 00475-1BF03 Brake Fluid - 12 oz.
$13.76
Genuine Toyota 04465-35290 Front Brake Pad Set
$91.75
EBC DP61657 Greenstuff Brake Pads for 2005 and up Toyota Tacoma 4WD 2.7 - Front
$106.39
To Top