1st Gen Lunchtable Thread - General Discussion

Oh yeah. I have a problem.

Two years of Pick-n-Pull receipts.

 

https://youtu.be/zuo9uC42RVw

Check this frame replacement out!

 

I can't believe I watched all of that! They have that down to a step by step process and was cool as hell to watch

 

Assuming all tightening was to spec, that tech is a freaking stud. All seemed very methodical and process oriented. Like when he opened every package to verify he had every correct part, etc. Freaking awesome to watch

 

They’re probably high too, housing in the basin is pretty ridiculous

 

Middle of no where Utah is here

P.O. Box 440106 Koosharem, UT 84744
http://www.ksl.com/homes/listing/40273776

 

$18 OEMTOOLS 25101 Universal Oil Filter Wrench, 3 Leg Oil Filter Claw, Oil Filter Magnet Removes 2.4"-3.6" Filters, 3/8" Oil Wrench Drive Tool, Compact Oil Filter Remover for Tight Spaces

https://www.amazon.com/dp/B078K4Z2Z...m/images/I/81lNhizI0mL.jpg&sb-ci-a=B078K4Z2Z5
what do you guys think of this style?

 

I do it by hand. And never had an issue....

 

I had a nightmarish 2 day period once where after having a shop change my oil I spent two days trying every trick in the book to remove a filter. They are hand tight now but want one in the event I help a friend lol.

 

Ah okey, i never had one I couldn’t losen by hand.
But i do own the older style filter removed

 

I literally had to pound a 1/4 inch stud through the filter, didn't have a screwdriver that was girthy enough.

 

Pics or it didn’t happen

 

sec

 

Don't have one with the stud through it, but this is all the evidence I have.
https://www.instagram.com/p/BfmGE1vA00L/?utm_source=ig_web_button_share_sheet

 

That screw driver you can see in my bed started to bend lol, had to use that big long stud.

 

Rad

 

That was a cool day.

 

I have one of those. Haven't used it for a while just cause I've had decent access to my vehicles and I take a lot less side work these days

 

Nope, I got 20 minutes in and reverified everything from top and they said they really wanted to replace it and if it was cheap and fast they'd a fixed it. I wasn't fast enough obviously. Pissed me off. Are no high limits on back on that one. Had to be wiring after those 3 loads are back in circuit together. But had 240 going out of board at relays. And the oven safety therm was closed still. Had to be something though in the back

 

Thats what i was telling him.
My guess was there is a bad wire they all share in common that wasn’t allowing voltage to pass