What Have You Done To Your 3rd Gen Today?

I think Discount Tire still fixes flats and slow leaks for free. If it's the TPMS sensor leaking, they swap it out and put in a rebuilt one, again, for free. I've used them several times.

 

Will have to test it out once dark, installed this afternoon

 

Removed the cheese grater.

 

Best $100 I spent this weekend. OEM bed divider from a local BST.

 

I might alone here, but Weathertechs are not that great of a mat. The ones in my old Tacoma curled up and shrank.

 

Maybe they improved them for the 3rd gen.

 

RCI

 

Thanks. The rims and tires are 16x8 -20 285/75-16, lift is about 2.5".

 

Fourth vehicle to have them in. Never had problems. I do generally take care not to crush or bend plastic overly and remove things from my truck/cars when I get home so things causing bending would not sit very long. I bet they would have warrantied them for you. My son has them in a hatch back that gets abused with dogs and god knows what else, also holding up.

 

No food No treats = No entry.

 

virgin oil change.....oh, I feel so "different"

 

I believe just gravity, after reading one of the positive reviews. It stated that if you did not pull off the object, that was magnetically connected to the hanging mount, in a downward angle then the hanging mount would come off with whatever was attached to it.

 

Try AVID off-road.
https://avidoffroad.com/cart/index....6-tacoma/2012-2014-toyota-tacoma-sliders.html

They make steps that look like rock sliders but bolt to stock step mounts. Had a pair on a previous vehicle and they look good. Maybe they can help you out.

 

If you aren't going to be in a position where they need to hold the weight of the vehicle, then steps should work fine.

 

Use windex or 409. Best thing to find a small air leak. Used this trick for the last 25 yrs when at work.

 

Washed and waxed.

 

x2

 

Is it bad that all I can fixate on is your park job?

Looks great btw!

Nothing but good experiences with DT!

 

You did the single leaf and ¼” lean spacer? I like the idea of a bit of lift but mostly want to get rid of the “float” of the stock suspension.

 

Not too much to show yet. Just got the truck Wednesday. Took off front air dam. Put in bed mat. Installed the mounts for the Hi Rise Crossbars from KB Voodoo. USPS didn't deliver the bars at the same time so waiting on those.