Ontario BS Thread

Wing night feeler, April 12th
Time and location open to suggestions

Who would be interested?
1. @Joe23
2. @Norilsk
3.

 

If a few people are interested I'm down to go.

 

I didn't say I am free, CUNT.

 

You will make yourself free or I will burn down your house while you're in Alberta .

Don't forget I know where you live, cunt


And I'll rape you

 

Please do, I am tired of owning it.

Any woodworkers here, what's the best wood to buy at Home Depot to build bed platform that will be exposed to weather?

 

Wing night feeler, April 12th
Time and location open to suggestions

Who would be interested?
1. @Joe23
2. @Norilsk
3. @Atlas86
I should be able to make it

 

Good one side fir plywood and real good paint

 

How thick are you looking for?
There might be some old FRP trailer doors, I'd have to see.. 3/4" - 1" thick.
I do know there are these plastic aluminum skinned doors, Z-Plate. 1/2" thick
9'x4'
Completely impervious to weather.

 

3/4 to lay across the bed, 3 pieces, no support in the middle since it will be reserved for 2nd spare tire.


Here is a professional sketch

 

I edited my post. Might be you're interested in using trailer doors.

 

Ok, my experience of almost no problems dealing with them means nothing. I get it.

It is not my fault that CT motorsports cant play the game and take my money. I know you are close to them and its easy for you. Not for me. I cant walk in and talk to them about all the things like I wish I could.

A website that lets me select my truck, then shows me all the stuff I can buy. Just lets me spend my money. You cant blame someone for wanting it to be easier to get the right stuff. Which I have gotten each time I have dealt with the evil company.

I dont understand what mentality I have that is promoting horrible things? Did he give out stickers, and it was successful in helping him bamboozle everyone?

 

I know there's shit loads of 3/4" plywood doors.
Plywood with an aluminum skin on one side, steel on the other.

 

Mind sharing the place where they are lol?

 

My work! Lol. You have those options, if you want I can cut it up for you to make it easy.
The Z plate stuff is only 1/2" thick but I'd say it's stronger then the plywood doors.
But if you want the plywood, give me your dimensions. I can cut it apart real quickly.

 

Dood, you're such an asshole

 

Sanded 3/4 ply will be best.
But home Depot wood is shit . It's always warped as fuck

Try Central Fairbanks
Or new Canadians

 

We got a winner here! I will measure things around and PM you.

 

Wing night feeler, April 12th
Time and location open to suggestions

Who would be interested?
1. @Joe23
2. @Norilsk
3. @Atlas86
4. @Taco-Bell (depends on time I won’t be off work till 5:30)

 

Yo. https://www.instagram.com/life.to.t...tm_source=ig_share_sheet&igshid=1bljb8o9zmo7l

 

This is an example of z plate. This is just a piece of side panel. Like I said the doors are 1/2".