The Lair

Yep. Used it for bench testing. Worked really well for the couple quick bumps I gave it to verify which wire did which.

Yep! Going to drill a hole in the solenoid case and seal it with silicone for all the in cab wiring to route through.

 

FYI the 20% off coupon this month doesn't have titanium in the fine print of excluded items![/QUOT[/QUOTE]

@EatSleepTacos what welding helmet do you use?

 

The Vulcan auto dimming from harbor freight

 

Yeah Yeah I know I am late to the party. Tell me about that straw you are using on the McDonalds cut on the table Randall. Looks custom AF.

 

Thanks. I'm going to pick one up today and a few other welding accessories.

 

That’s brake fluid in there. When I put my new brake line in I bled the brakes into there

 

Missed marketing opportunity.

That's a #RandyFab Exclusive Brake Bleeder. No other company makes one like this. It's been built to last and tested rigorously. Works with any fast food cup, some water bottles, and a few drain pans.
All for the low low price of 4 installments of $4.99!

BUT WAIT THERE'S MORE!

If you order within the next 72 hours you get a second one free! Just pay Shipping and Handling!


#RandyFab takes no responsibility for operator error, defects in material, user intelligence, or cup quality. This offer valid in 50 states and Puerto Rico. Shipping rates may vary. Not valid on the Moon or Mars, sorry Elon.

 

You can take care of that issue for $2.75 !

https://www.youtube.com/watch?v=hp8ZEcfhMnk


Oh wait, I forgot, you're truck is not a fan of water.

 

Needed a 3 wire run for my winch controls, so I cut up an old extension cord. With some heat shrink and Chinese finger trap shit, it looks great! New solenoid plug will get in tomorrow and I’ll get that end finished, and then we wait for the new bumper.

Once my new bumper is ready from powder, the winch will go back on the truck and it’ll all be finalized.

 

Your interior needs a bath Randy!

 

You aint kidding. I still need to clean all my stuff out of the inside from this last wheeling trip!

 

Looks fantastic! Hey, do you have a link for said Chinese finger trap stuff?

I want to connect the factory brake controller pigtail to the new Tekonsha pigtail and will splice/solder them but I want the entire length of the new extended length to look factory like that. That looks guuud!

I'm mounting the brake controller up on the trim bezel to the left of the steering wheel right above the vent. I played with mounting it to the face of the dash with velcro to test it and kept banging my knees on it. For security I will remove it when I am not using it and only 3" of the end of the cable will be exposed and the strip of velcro on the top of the trim bezel.

 

Reminds me of this Ford fusion I parked next to at work today. The entire back floorboard is covered in a mountain of sugar free red bull cans.

 

However it does look like he might have used a wetnap to wipe out those cup holders.

 

Wang-Data PET Black Cable Sleeve 1/4" X 100ft

https://www.amazon.com/Wang-Data-Bl...ded+wire+loom&qid=1554333150&s=gateway&sr=8-3

 

1/4" pretty much covers everything? I plan on running my light bars wiring to a multi switch and will need to get that over to the firewall, but not necessarily through it.

 

Yeah, I'm on my second 100' run of the 1/4". It expands nicely and can cover a pretty decent range of stuff. I'm happy with it.

 

Ok cool, thanks Randy, I like the clean OEM look. Ordering it.

 

Urrrr got my subaru home. Daughter had it for the past 7 yrs. The dipstick looks like there us tar stuck to it. Looks like grease coming out the front seal. Wont start. Scan guage is not picking up a fault code. Than noticed tge security light looking like a strobe. Yep the security system is fried. Hoping to figure out on how to bypass it.

 

Sounds like you have your work cut out for you