What Have You Done To Your 2nd Gen Tacoma Today?

ISIS fucks everyone over though. Apples to oranges. My PB patch collector value goes up as everyone throws theirs out.

 

Clean AF

 

Fair nuff

 

Literally. We blasted my truck with a pressure washer before these photos because I hadn't washed it since wheeling last lol

 

Haha nice

 

With your welding exp you could work where I work easily. Not sure you want to up root and go to Kansas City though lol

 

What an improvement. Looks great!

 

Thank you, just need some bigger tires next an it will be done exterior wise.

 

Thanks

 

i think that would be a little hard to do right now

 

DAMN!!! that is sick!!

 

Put yellow Laminex on the ditch lights and installed an eBay TRD badge I had laying around on the grille.



On the fence on the badge.

 

Used it as a table for a beer and fish, onion ring, and fry fry.

 

Got the truck back today and couldn’t be happier with the result of the wrap. Took the truck to get some supplies for carpeting the inside now. He dad extra vinyl so he threw it on the windows of the shell due to the lack of tent. It’s growing on me.

 

So after about a year, no kidding, I got around to installing a black aFe tip. Let's hope it lasts without mudflaps


Then came touched the welds and rest of pipe and clamp with Rustoleum high heat flat black paint.


.
Then let my 11 month old drive the Taco

 

More photos of hood bro!

 

Replaced the transfer case and front diff oil.
***Warning***That drain plug on the front diff is a whore, I stripped it out almost completely trying to loosen it. Stop what you are doing and get a new plug. PB blaster twice 2 days before. Its just a crap design with dissimilar metals, and a little 10mm hex key and a huge plug. So if you have a little left to grip the trick is to lightly tap the back of the head of the breaker bar with a very small 6 oz ballpien hammer while slowly gently loosening it. Then after a few minutes it breaks the seal you smash your knuckles but you did it. It got a little nickel anti seize before being reinstalled and torqued to spec.

 

I did some test runs on tight turns fwd/rev & flexing. No problems.

 

Ok, I kind of had to laugh, at first, I thought maybe the shifter was for your wife........

Just kidding Man!!!