Long Travel BS Thread

I've got their 2.0x2 on the rear of my truck. No issues, but I haven't really got out since they've been installed. They have a presence on the board.

https://www.tacomaworld.com/forums/locked-off-road.236/
@TacomaGuy23

 

Very interested to see how you attach these.. Mind posting up some pics when you get em installed? Would like these for my truck until i can afford some better seats

 

Also interested

 

I’m rocking them since November. Beat on them quite a bit. Holding up fine so far.

 

What size are you looking for?

 

They’re just the factory seats, nothing special. Same as TRD OR seats. Throw the harness up and over and tuck into the seat pocket when you want to just use the std belt. But I will likely post pics along the cage build. Gonna start pulling the interior out this week. Progress will be slow until I am on summer break mid May.

 

2.0x2

 

I’ll have a lightly used set of Kings with total chaos brackets coming off my truck in a week or two when my next shipment of king stuff comes in.

 

Pmd ya

 

Thanks Jeremy. If anyone has any questions they want me to answer, please feel free to DM me. I will be happy to assist

 

Confirmed, @TacomaGuy23 responded to my queries right away and was very helpful. I am looking forward to seeing C/Os and bypasses installed on someones truck.

 

Appreciate the kind words. Bumps are our main sellers, but we have a few guys running the coilovers. Let me see if I can get some pics/reviews that I can post up for you guys to read on.

 

I’m currently running a 4” 500 over a 18” 650

 

How’s your ride height?

 

Alright I need some advice guys.

So I have a Solo Motorsports +2 kit. Here are some issues:

-With +2 Baja Kits Tie Rod Extensions, I can’t get the toe correct. It’s as if the tie rod extensions are too long and will toe out both sides, like this \ /

-The tie rod is hitting the spring, which is destroying turning radius. Check out the alignment sheet for the settings

-CV lasted all 10 miles lol, probably ripped boot so not an issue but annoying nevertheless

 

Wrong lower spring seat is causing the tie rot to hit the Coilover. And it looks like you have a washer in between the tie rod extension and outer tie rod on the drivers side, by no extension at all on the passenger side? Definitely something wrong with that setup

 

Wrong lower spring seat? Or spacers on the bottom?

And I’ll have to try again tomorrow putting both tie rod extensions on fully threaded. I tried earlier today and had no lucky at all.

 

Spec sheet shows toe is just fine? Also if they were too long it would be a toe in issue, no? As noted above seems like only one side has an extension...

 

I tried today having both extensions on and it toe’d out with no more movement allowed (extension all the way into tie rod and still toe’d out).

 

But it aligns fine with only one?