HELP! Grillcraft owners..

Okay, so I see a few of you owners with the grillcraft have a TRD emblem attached to the front. I ordered mines from ebay (adhesive tape in the back) stuck it on, and within a trip it fell down on the ground..My question is: How did you folks attach the emblem to the grill? thanks in advance..

 

There are several ways I can think of.. probably a small screw/bolt attached to the back by epoxy, or even that quicksteel stuff. I have a large TOYOTA emblem attached to my customergrills front (not grillcraft), but I drilled holes and used bolts.

I hated using epoxy, quicksteel was awesome though.

 

Get some 3M automotive double-sided tape from your friendly Wal-mart or auto parts store. I've had my TACOMA badge stuck to my Grillcraft for about a year with no signs of weakening.

 

x2

 

you can order the emblem with a bolt/nut backing to them.

 

x3

 

i also have a TOYOTA emblem as you can see and i used the 3M double sided tape and im pretty sure the steering wheel will fall off before the emblem will. id try cleaning it with rubbing alcohol on both surfaces and then give it another shot. good luck

 

^^^ this way or go buy 3M double sided tape.

 

That's what I did.

 

I also bought the emblem with the bolts in the back- tried it on, but it sticks out passed the grill (looks kinda 3D which sucks) I like the flushed on-grill look better. I will probably go with the 3M tape..thanks y'all