What Have You Done To Your 2nd Gen Tacoma Today?

Don’t want to be THAT guy,

But are there no jack stands??? Are you only using the jack under the diff?

 

It has a total of 9". 6" bds and 3" body lift.

 

No more than a passenger weighs, prolly half as much. But if you’re going to do this do the best method.... use MLV.

https://www.sounddeadenershowdown.com/vehicle-area-treatments

 

i see jack stands

 

The the Bech to Bucket swap, installed a new radio so I can now used Bluetooth to listen to my iPhone, ran the wires for my cb that I’ll hook up today.

 

https://www.tacomaworld.com/threads/yeti-style-cup-holder-insert-for-sale.473078/
They are well crafted very nice fit!

 

Finished yesterday my dual battery system. And put a temperature gauge for the controllers into the holes on the dashboard which have been there from the previous system.

 

If you look to either side of the diff you will see jack stands, and wheel chocks on each front tire.

 

HAHAHAHA!!

 

Link?

 

If they tried to swap leaf packs while only supporting the truck under the diff, they’re in for a real bad time. But if you look closely there are jack stands.

 

My old phone became my dedicated odbii monitor

 

Bought them used, no link

 

Now THAT is BADASS!!

 

Last mod for a bit, all. Installed LED fog lights with strobe and flash feature. You can go from full LED, to amber, to warm white (who wants that?), and a strobe... cuz I'm a safety guy just by quickly turning off and on your factory fog light switch. I'll be putting these up for sale once my new bumper gets in (July sometime) because I got squadron fogs with it. PM me if you're interested. Whoops, almost forgot, put in a shorty antenna.

 

Not exactly to the truck, but for the truck. Hitches where getting a bit of surface rust and paint flaking off. Cleaned them up with wire wheel on grinder and re painting.



P.S before someone says something.... I only used a wire wheel to clean just the rust and some of the paint off. Strength of hitch should not be effected much if at all.

 

First time getting a full detail in 4 years and she looks amazing

 

Swapped out MAXSA boards for maxtrax. They sold me on the mounting options and I got sick of the orange.

 

That red POPS. Looks fantastic.

 

Gotcha, ok thanks.